lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-28-2010, 01:17 PM   #1
Gone Wild
 
SaltLifeCC's Avatar
 
Join Date: Jun 2010
Posts: 729
Default Time/tools involved 6" spindle lift?

What type of tools do I need to install a 6" spindle lift on my precedent? I'm sure it will be a Jakes kit but haven't ordered it yet. Also, is it something I can do myself or are a second pair of hands a must?

Not sure what I need but I've collected quite a bit of tools when I was doing my own mods to my Harley. So, I have a bike/ATV lift that should be more than capable of lifting the cart as well. I also have a bottle jack if needed. What I don't have are jackstands. I might be able to use something else or borrow one or two but not sure where I'd find four unless I go out and buy them. I was thinking, rather than doing the front end, then the back, or vice versa, maybe I could jack up one side of the cart and do that and then do the other side?

How much time should it take and is there a concern with wheel alignment or toe after putting everything together? Is that adjustable?
SaltLifeCC is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-28-2010, 01:21 PM   #2
??????
 
LostHusker's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: South TX
Posts: 8,569
Default Re: Time/tools involved 6" spindle lift?

Floor Jack, jack stands, standard tools, sockets, 9/16" most common on CC, and some lock tight.
LostHusker is offline   Reply With Quote
Unread 09-28-2010, 11:18 PM   #3
Not Yet Wild
 
Join Date: Aug 2010
Posts: 35
Default Re: Time/tools involved 6" spindle lift?

On first read of your post, I thought you said you had a bottle of Jack. Probably not the best tool to use, but try it and let us know!
lizardman is offline   Reply With Quote
Unread 09-29-2010, 07:07 PM   #4
Not Yet Wild
 
Join Date: Sep 2010
Posts: 49
Talking Re: Time/tools involved 6" spindle lift?

Sounds like a good reason to go out and buy some jack stands to me
redberanclubcar is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Jakes Spindle lift 3" vs. 6" Lifted Golf Carts
CC Arm or Spindle 6" lift? Lifted Golf Carts
Jake's 6" Spindle Lift Kit Lifted Golf Carts
Jake's 6" Spindle Lift Kit Question Electric Club Car
Cut and reweld spindle to get 4" lift? Lifted Golf Carts


All times are GMT -5. The time now is 03:26 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.