|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-28-2010, 12:17 PM | #1 |
Gone Wild
Join Date: Jun 2010
Posts: 734
|
Time/tools involved 6" spindle lift?
What type of tools do I need to install a 6" spindle lift on my precedent? I'm sure it will be a Jakes kit but haven't ordered it yet. Also, is it something I can do myself or are a second pair of hands a must?
Not sure what I need but I've collected quite a bit of tools when I was doing my own mods to my Harley. So, I have a bike/ATV lift that should be more than capable of lifting the cart as well. I also have a bottle jack if needed. What I don't have are jackstands. I might be able to use something else or borrow one or two but not sure where I'd find four unless I go out and buy them. I was thinking, rather than doing the front end, then the back, or vice versa, maybe I could jack up one side of the cart and do that and then do the other side? How much time should it take and is there a concern with wheel alignment or toe after putting everything together? Is that adjustable? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2010, 12:21 PM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Time/tools involved 6" spindle lift?
Floor Jack, jack stands, standard tools, sockets, 9/16" most common on CC, and some lock tight.
|
09-28-2010, 10:18 PM | #3 |
Not Yet Wild
Join Date: Aug 2010
Posts: 35
|
Re: Time/tools involved 6" spindle lift?
On first read of your post, I thought you said you had a bottle of Jack. Probably not the best tool to use, but try it and let us know!
|
09-29-2010, 06:07 PM | #4 |
Not Yet Wild
Join Date: Sep 2010
Posts: 49
|
Re: Time/tools involved 6" spindle lift?
Sounds like a good reason to go out and buy some jack stands to me
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Jakes Spindle lift 3" vs. 6" | Lifted Golf Carts | |||
CC Arm or Spindle 6" lift? | Lifted Golf Carts | |||
Jake's 6" Spindle Lift Kit | Lifted Golf Carts | |||
Jake's 6" Spindle Lift Kit Question | Electric Club Car | |||
Cut and reweld spindle to get 4" lift? | Lifted Golf Carts |