|10-05-2010, 11:21 PM||#1|
Not Yet Wild
Join Date: Sep 2010
I am nearing the completion of my first cart build. I promise to post pics later,as i am proud of what a little coonass innovation can do with a pile of parts. I have installed the lift, made my own flip seat,made the rear roof brackets, put a nice basket rack on the front, and other things that I had to "rig". My question, I have a clubcar rearend attached to a ge380 motor, with a logisystems 700 cont.. The wiring diagram given to me seems pretty simple, but is there supposed to be 2 cables coming off the B+ side of the cont. one to the solenoid and the other to A1 on motor. This is a ezgo cart but it has been taken down to the bare bones(wiring that is). Also I am waiting on a pb-6 to install there are 4 wires in the pedal box, 2 are the 0@5k, the other i was told could b run throught he key switch to make sure the contactor is not always engerized. If anyone can give alittle help, thx. don't want to burn anything up.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|Looking for a used 4x4 conversion kit 4 ezgo||Golf Carts and Parts|
|Club Car controller conversion||Extreme DC!|
|ezgo hei conversion||Gas EZGO|
|club car to ezgo conversion||Electric EZGO|
|ezgo gas to club car conversion||Gas Club Car|