lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-06-2010, 09:43 PM   #1
Not Yet Wild
 
Join Date: Jun 2010
Posts: 6
Talking 92 clubca f/r switch

the cart i have moves as soon as u switch it to forward without pressing pedal but works fine in reverse any clue to what is going on
fatboybug05 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-07-2010, 10:47 AM   #2
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: 92 clubca f/r switch

You didnt state voltage and on a cart that old that could have been changed many times so forum needs additional info. What type of pedal control do you have? 1=Stock would be V Glide ( pie shaped unit ) under drivers seat with 6 heavy gauge cables running to resistor bank behind batterys. 2= Some models came with V Glide and light gauge wiring running to a solid state controller? Please advise with needed info as the systems are very different in diagnosing problems. Otherwise its just a guessing game that takes up your time as well as forums. Has any wiring been done before problem started? It really sounds like a possiblity that solenoid is stuck in closed postion or possible wiring problem, but until forum has needed info?
OLD MEC is offline   Reply With Quote
Unread 10-07-2010, 02:25 PM   #3
Not Yet Wild
 
Join Date: Jun 2010
Posts: 6
Default Re: 92 clubca f/r switch

it is a 36v with 6 wires runnig to a resistor bank & all the wires were undone when i got the cart everything seems right excepted the forward problem
fatboybug05 is offline   Reply With Quote
Unread 10-07-2010, 04:49 PM   #4
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: 92 clubca f/r switch

First I would check that solenoid isnt stuck in ON POSITION as this can feed power to V Glide before pedal is pressed down? If solenoid is OK I would next check condition of V Glide unit interrior contacts such as wiper arm, wiper brush or wiper spring could be out of place causing more than one contact being jumped at a time? Also check and make sure that wiper arm when pedal is UP there should be no contact on any of contacts from bottom to top of swing? If all that is in good condition I would compare wiring with diagram in Stickies under heading "Electric Club car Wiring Diagram and second diagram down from top? It doesn't show wiring colors but I have them for you by wire numbers in drawing
#3-Black, #4-Gray, #5-Black, #6-Blue, #7-Green, #8-Yellow, #9-Orange, #10-Green slow speed tap on middle battery in pack, #11-White to lower right side of F&R switch.
OLD MEC is offline   Reply With Quote
Unread 10-07-2010, 08:29 PM   #5
Not Yet Wild
 
Join Date: Jun 2010
Posts: 6
Default Re: 92 clubca f/r switch

i checked can anyone tell me what the differance between a motor with a1 f1 & a2 f2 and a1 s1& a2 s2 and does anyone have a wiring diagram of witch wires go to the f/r switch & the motor
fatboybug05 is offline   Reply With Quote
Unread 10-07-2010, 08:59 PM   #6
Moderator
 
rib33024's Avatar
E-Z-GO
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 13,153
Default Re: 92 clubca f/r switch

Quote:
Originally Posted by rabbitreborn;
a series wound motor is marked A1,A2,S1,S2 and a Shunt wound is marked A1,A2,F1,F2.
rib33024 is offline   Reply With Quote
Unread 10-07-2010, 09:14 PM   #7
Not Yet Wild
 
Join Date: Jun 2010
Posts: 6
Default Re: 92 clubca f/r switch

can a shunt wound be used on a golf cart because that is whats on the one iam working on could that be the problem with the cart
fatboybug05 is offline   Reply With Quote
Unread 10-08-2010, 09:59 AM   #8
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: 92 clubca f/r switch

You ( can use a shunt motor ) by changing to a solid state controller ALLTRAX, converting your V Glide to a solid state electronic resistance unit kit available, or better yet install a PB-6 pot control to replace V Glide, redo all control wiring to Shunt, change complete F&R control, change all 6 gauge wiring to 4 gauge, etc?
I personally would pick up a good condition used 36 volt series motor and go with V Glide conversion ( kit CC available ), add solid state controller ( ALLTRAX ), need to only do minor wiring changes, and retain your existing F&R control, Retain your same solenoid, but in both cases change all 6 gauge wiring with 4 guage. Much simpler change over than regen ( shunt motor ) and I think you would find costs cheaper.
If you can tell me which F&R control you have I may have wiring diagram for it as I have the original, and later model replacement model wiring diagrams?
OLD MEC is offline   Reply With Quote
Unread 10-18-2010, 01:53 PM   #9
Not Yet Wild
 
Join Date: Jun 2010
Posts: 6
Default Re: 92 clubca f/r switch

The f/r switch that I have has two terminals in the middle one on the right and two on the bottom. It is a 36v cart any help with the wiring would be appreciated
fatboybug05 is offline   Reply With Quote
Unread 10-18-2010, 10:24 PM   #10
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Location: Beaufort, SC
Posts: 39
Default Re: 92 clubca f/r switch

Oldmec,

I am also in need of the F&R wiring diagram for this same F&R Switch. My son thought he was doing me a favor when he disconnected all the wires for the new one I was putting in. Of course I had not labled anything yet or taken a picture for future ref!

Thanks,

Robert
rgecy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
forward/reverse switch change to toggle switch Electric Club Car
Key switch & Kill switch question Gas Club Car
Forward Reverse switch limit switch Electric Club Car
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! Gas Yamaha
Micro switch on fwd and rev switch has bee removed Electric EZGO


All times are GMT -5. The time now is 03:24 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.