lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-11-2010, 03:08 PM   #1
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Location: Beaufort, SC
Posts: 39
Default Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

I have a 92 CC DS 36v Resitor Cart with Vglide and had to replace the F&R switch. I got a nice used one from a local dealer and got home to find that mine had 3 main terminal lugs and one micro switch, and the one from the dealer had two main lugs and 3 micro switches. Obviously from a different cart, but can I make it work?

I am going to be converting the cart to solid state 48v here shortly, but wanted to get it working for now with the existing setup. Any ideas.

Here is a picture of the one I have. The new one only has two lugs.



Thanks,

Robert
rgecy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-11-2010, 03:29 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,063
Default Re: Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

It sounds like you got the 48v switch ...... go back and get the 36v switch. it is better, even when you go to 48v you want the 36v switch cuz it handles the amperage better ........
scottyb is offline   Reply With Quote
Unread 10-11-2010, 06:04 PM   #3
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

If I am remember correctly on that old a cart the replacement unit has additional lug ( 2 lugs side by side ) that would be on bottom right side and that one was for half speed reverse? And if I am correct just connect the two lugs together with a 6 gauge wire and connect existing wire to one lug, or I use a piece of 3/8"-1/2" copper tubing hammered flat and drilled to act as better jumper? I like the 36 volt unit like Scottyb says but you will need the extra 2 micro's later when you convert to 48 volts so the option is yours?
OLD MEC is offline   Reply With Quote
Unread 10-11-2010, 06:38 PM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,063
Default Re: Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

There is a conversion for the 2 extra micros if somebody reminds I will get a picture of it. Real simple little aluminum tab ....
scottyb is offline   Reply With Quote
Unread 10-12-2010, 10:36 AM   #5
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

Great to know about part to adapt to 3 micros SCOTTYB. Do you have part number and picture?
OLD MEC is offline   Reply With Quote
Unread 10-12-2010, 08:31 PM   #6
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Location: Beaufort, SC
Posts: 39
Default Re: Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

So, can I use the one with the two lugs with my current 36v setup?
rgecy is offline   Reply With Quote
Unread 10-12-2010, 08:55 PM   #7
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,063
Default Re: Replacing the F&R on 92 CC DS 36v Resistor Cart...Questions?

no, you need part #1011997 with three terminals and 2 on the center swivel part.. it is 1983 & up 36 volt with resistors F&R
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
resistor cart Electric Club Car
36 volt to 48 volt on a resistor cart questions... Electric Club Car
5TH speed resistor has a burned mark on resistor board and melted the wire Electric EZGO
Resistor cart? Electric Club Car
85 ClubCar, Questions about solenoids and resistor coils Electric Club Car


All times are GMT -5. The time now is 03:58 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.