lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-14-2010, 05:36 PM   #1
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,529
Default reverse throttle input?

I have a 99 series cart that was brought to me to figure out a problem after the owner installed a ge controller. The problem is that the cart now has now throttle control, even the slight bit of throttle is WOT and there is no variation. It looks like the throttle input may be wrong for the contoller. This cart has the pie shapped throtttle with the newer 6 pin connect not the traditional 3 pin triangle. I suspect the contoller is getting the wrong ohms for what it is looking for and going wot. Is it possible to switch the yellow and green throttle wires at the contoller on pins 2 and 3 to temp correct this issue or will this not work?
cheapjeep2 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-14-2010, 06:11 PM   #2
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: reverse throttle input?

If its a 48 volt cart have you checked the v glide for ohms resistance? Then you could compare with controller input? Stock CC have 5 ohms without pedal pushed to 0 ohms with pedal all the way to floor. I have never had the problem you are seeing? I wonder if the V glide have small electronic resistors on back side of v glide? If it does you might be able to do a switch, but having never done that I would ask around before taking a chance on damaging a new GE Controller? Have you confirmed that the GE controller by numberis is correct for this application rather than v glide output is wrong for controller?
OLD MEC is offline   Reply With Quote
Unread 10-14-2010, 07:05 PM   #3
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,529
Default Re: reverse throttle input?

Disregard my post, the controller and throttle are right for each other, it's a bad controller.
cheapjeep2 is offline   Reply With Quote
Unread 10-15-2010, 09:49 AM   #4
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: reverse throttle input?

Glad you found problem. Unusual to find a new controller of any brand defective, but it can happen as more and more former American made products shift to over seas production?
OLD MEC is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2000 Club Car DS 48v-Throttle input for controller? Electric Club Car
newbie.. need input Gas Club Car
throttle problem,new controller,throttle works backwards Electric EZGO
Looking for 1999 Series CC Throttle Input Value Electric Club Car
G9 Input Shaft? Gas Yamaha


All times are GMT -5. The time now is 08:20 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.