lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-22-2010, 07:06 AM   #1
Not Yet Wild
 
Join Date: Oct 2009
Posts: 44
Default Cart build

Thanks to all of the great info on this site I started the conversion of my 84 to solid state. I have all my big parts in need to finish some body work and paint. I am trying to finish this thing for holloween I will post pics when I can.
silver06xe is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-22-2010, 08:40 AM   #2
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Cart build

Dont rush as you are doing fine and dont put yourself on a dead line, and of course we want to see lots of pictures.
OLD MEC is offline   Reply With Quote
Unread 10-22-2010, 09:03 AM   #3
Not Yet Wild
 
Join Date: Oct 2009
Posts: 44
Default Re: Cart build

I started last week but I only get alittle time at night to work on it. I have most of the fab work done and I am going to have the body primed but I will paint after so I have alittle more time to get it like I want. I am sure it will take a me some trial and error on the paint and I don't want to rush that. I have learns a lot of ideas from this site
silver06xe is offline   Reply With Quote
Unread 10-22-2010, 11:25 AM   #4
Not Yet Wild
 
Join Date: Oct 2009
Posts: 44
Default Re: Cart build

do have a question on wiring micro switches. Should I go from key switch to micro on fnr then to com on pb-6 thenwere do I need to go with the other 2 spots on pb-6 micro
silver06xe is offline   Reply With Quote
Unread 10-22-2010, 03:00 PM   #5
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Cart build

I go from key switch to COMMON TERMINAL on micro at bottom of PB6, To Normally Open terminal connection on bottom of PB6 then to micro on F&R control, and from there to the solenoid small post and #1 small terminal on controller. The loom holds two seperate leads from PB6 POT that go to small terminals 2 and 3 on controller.
OLD MEC is offline   Reply With Quote
Unread 10-22-2010, 04:06 PM   #6
Not Yet Wild
 
Join Date: Oct 2009
Posts: 44
Default Re: Cart build

I am just curious what is the middle pin on the micro switch on the pb-6 for? Thanks for your help
silver06xe is offline   Reply With Quote
Unread 10-22-2010, 05:36 PM   #7
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Cart build

It should be Normally Closed as I remember? Its been awhile since I last wired a new PB6.
OLD MEC is offline   Reply With Quote
Unread 10-26-2010, 08:15 AM   #8
Not Yet Wild
 
Join Date: Oct 2009
Posts: 44
Default Re: Cart build

I have all the small wiring done got new batteries now I need to figure how to wire them the problem that I hav eis on the motor the diagram has A1 A2 S1 & S2 but my motor has F1 & F2 I guess I use the F1&2 for the S1&2
silver06xe is offline   Reply With Quote
Unread 10-26-2010, 10:20 AM   #9
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Cart build

( WAIT, STOP, BACK UP, THERE SILVER06XE ) 1984 CC came stock with a "SERIES MOTOR" ( S1-S2 ) so IF your motor has F1-F2 terminals ( Please Confirm S OR F ) some one has slipped in a later model 1995 and up Regen 1-2, Sepex, IQ type motor ( F1-F2 ) so now all wiring will have to be according to it? What controller do you have, is it for series or OTHER?? THE CONTROLLER MADE FOR A SERIES MOTOR WILL NOT WORK ON SHUNT MOTORS? Also wiring is different in how its hooked up?
SORRY ABOUT THIS AS I KNOW YOU WANTED IT DONE BY HALLOWEEN????
OLD MEC is offline   Reply With Quote
Unread 10-26-2010, 12:13 PM   #10
Not Yet Wild
 
Join Date: Oct 2009
Posts: 44
Default Re: Cart build

I am sure it said F1 & F2 but when I get home I will see if I can find a number to look up. the controller I have is a curtis 1204 I have a number from the motor but I dont know if is any help 1012190
silver06xe is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
First Cart build Electric EZGO
'83 cart build Gas EZGO
My cart build... Lifted Golf Carts
stretch cart build Design Center


All times are GMT -5. The time now is 07:42 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.