lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-25-2010, 03:21 PM   #1
Getting Wild
 
dgcurtis's Avatar
Club Car
 
Join Date: Jul 2009
Location: Peachtree City, GA
Posts: 127
Default Heavy duty front spring for Precedent

I have an 06 Precedent and I was wondering if the front spring for a DS will work on a Precedent. More specifically, will a heavy duty spring for a DS work on a Precedent? I can't seem to find an HD front spring for the Precendent.

The reason for this is that I have a 3" lift kit and I have 22" tires on 12" rims and when I turn right or if the cart dips, the drivers side fender rubs on the tire. I think a stiffer spring or perhaps even a newer stock spring would fix this issue.

In case you are wondering why I don't have a 6" lift: I originally did. The problem was a 6" lift with 23" tires was too tall for some of the older tunnels in Peachtree City. I almost needed a shoe horn when I went through one. :)

Thanks,

DGC
dgcurtis is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-25-2010, 05:53 PM   #2
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Heavy duty front spring for Precedent

The 2006 Precedent uses the same stock spring as 2005 DS so it should interchange
CC Number 103628701.
OLD MEC is offline   Reply With Quote
Unread 10-26-2010, 08:02 AM   #3
Getting Wild
 
dgcurtis's Avatar
Club Car
 
Join Date: Jul 2009
Location: Peachtree City, GA
Posts: 127
Default Re: Heavy duty front spring for Precedent

Cool. I thought maybe they did since on one site I saw that they were selling a stock spring and they said that it was for a DS and Precedent but I wanted to be sure.

I ordered one last night so hopefully it will fix the rubbing issue.

Thanks,

DGC
dgcurtis is offline   Reply With Quote
Unread 10-26-2010, 05:14 PM   #4
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,966
Default Re: Heavy duty front spring for Precedent

The springs are the same between the two carts... the bushings aren't. You'll have to swap your Precedent bushings into the new spring or else it won't fit into the bottom of the kingpin. It'll be too wide.
TahoeDawgZ71 is offline   Reply With Quote
Unread 10-31-2010, 09:45 AM   #5
Getting Wild
 
dgcurtis's Avatar
Club Car
 
Join Date: Jul 2009
Location: Peachtree City, GA
Posts: 127
Default Re: Heavy duty front spring for Precedent

Ah, yes. I found that out before reading your post. :)

Sure enough, the bushings were too big. Luckily, the bushings from the stock spring were still in really good shape.

Thanks for the help

DGC
dgcurtis is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Heavy Duty Rear Leaf Spring Recommendation Electric EZGO
PLEASE HELP! heavy duty coil spring wont fit- G9 Gas Yamaha
heavy duty rear spring install help Gas Yamaha
Ez Go Heavy Duty Front End Golf Carts and Parts
heavy duty rear spring ? Electric Club Car


All times are GMT -5. The time now is 03:25 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.