lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-26-2010, 08:36 PM   #1
tampalsmith
Not Yet Wild
 
Join Date: Jun 2008
Posts: 11
Default OBC Installation Instructions

Do anyone have instructions on installing a new on board computer on a Club Car? I bought a new OBC but it didn't come with instructions.
tampalsmith is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-26-2010, 08:56 PM   #2
cheapjeep2
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
Default Re: OBC Installation Instructions

Quote:
Originally Posted by tampalsmith View Post
Do anyone have instructions on installing a new on board computer on a Club Car? I bought a new OBC but it didn't come with instructions.
It's pretty straight forward.

1. disconnect the battery pack at the negative side.

2. Running from the back of the cart to where the OBC is to the charging receptacle is a gray wire loom, that's part of the OBC, disconnect the yellow fuse holder, and use a 3/8" socket to remove the nut holding the black wire to the charging receptacle.

3. Remove the rear plastic cover that covers the motor and the controller, from the back of the cart, the OBC will be on the fire wall (so to speak) on the left side. There will be a weather tight connector that needs to unplugged. The negative battery cable as well as the negative lead for the OBC will be tied together on the B- port of the controller, you'll most likely need two 1/2" wrenches to remove the nut and bolt holding it to the controller.

4. Then on the OBC itself there is a 3/8" bolt on the very top of the OBC, which is hard to see and one on the bottom, these simply need to be backed out a bit but not removed and then the OBC will slide to the left and slip off the screws.

Installation is reverse of what you just did.
cheapjeep2 is offline   Reply With Quote
Old 10-26-2010, 09:25 PM   #3
Fishing Dude
Gone Wild
 
Fishing Dude's Avatar
Club Car
 
Join Date: Jul 2008
Location: Slums of Lake Erie
Posts: 3,721
Default Re: OBC Installation Instructions

make sure you reinstall same direction otherwise will not work.
Fishing Dude is offline   Reply With Quote
Old 10-27-2010, 07:41 AM   #4
tampalsmith
Not Yet Wild
 
Join Date: Jun 2008
Posts: 11
Default Re: OBC Installation Instructions

Thank you. I'll let you know how it works out.
tampalsmith is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
EZGO Freedom Light Kit Installation Instructions Electric EZGO
I need backseat installation instructions for club car Electric Club Car
wanted instructions Golf Carts and Parts
motor instructions Gas Club Car
Yamaha Torque Kit Instructions Gas Yamaha


All times are GMT -5. The time now is 01:04 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.