|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-19-2010, 01:18 AM | #1 |
Not Yet Wild
Join Date: Dec 2010
Location: Michigan
Posts: 73
|
If you had to do it over............
Attachment 41383Attachment 41383
Attachment 41384 lift complete.jpg Attachment 41384Just picked up a 36 volt, 1991 Club Car up off Craigslist for $225... Been looking for a cart for a while to build a Hunting Cart. Found a good deal I think. Stripped it down and installed an 8" Buggies A-Arm lift.. Thats the only mod I have done so far.... I am looking for any and all suggestions on:wheel/tire combos, 48 volt conversion, wire replacement.. Just asking for help on what you would not do again/purchase if you had to do it over.. I am looking to put a winch on the front... looking for ideas on a brush guard winch mount combo.. thanks for your help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-19-2010, 07:50 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: If you had to do it over............
With an 8" lift I imagine you are wanting to run some pretty big tires... I would suggest the 48v conversion.
|
12-19-2010, 10:33 PM | #3 |
Not Yet Wild
Join Date: Dec 2010
Location: Michigan
Posts: 73
|
Re: If you had to do it over............
Thanks Scotty, I am planning on 23" tires and a 48v conversion. I have searched and can't find a thread detailing the 48v conversion. What all is needed for this? It is a 91 with v glide and coils. Any help is much appreciated.
|
12-19-2010, 11:08 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: If you had to do it over............
You can keep the F&R switch and the motor, everything else has to get upgraded
you need a potentiometer, Curtis PB-6 or 16, I like a 480 amp controller and 200/600 amp solenoid kit.... You will need to fab a potentiometer mount and gas peddle connection. |
Tags |
club car, club car ds |
|
|