lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-15-2011, 12:30 PM   #1
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Help...Please!

Ok, i bought the pb-6. i have the blue and green wires connected, via some photos i found on this site, but i have no idea where to connect the black and white wires from the pb-6 to. i have a 99 cc 48v. my v-glide came off with a wiring harness that i have reused. it have 5 wires in it. i was able to understand that 1 wire will not be used, but i dont know which one that is. can anyone tell me what color wires to connect to the black and white wires from the pb-6? also, the color of the wire that will not be used out of the harness. thanks
white rice is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-15-2011, 12:37 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,072
Default Re: Help...Please!

The black and white wires send the throttle signal to the controller.
What is the throttle input for your controller ?
What year is your cart?
scottyb is online now   Reply With Quote
Unread 01-15-2011, 12:52 PM   #3
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Help...Please!

scotty, i have a 1999 club car 48v. i have a programmable alltrax, but from cc my input is 5k-0. thanks
white rice is offline   Reply With Quote
Unread 01-15-2011, 12:55 PM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,072
Default Re: Help...Please!

Okay this is where I was wanting to get to... the PB-6 will have an 0-5k output your Alltrax must be programmed to the same input
scottyb is online now   Reply With Quote
Unread 01-15-2011, 01:00 PM   #5
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Help...Please!

yeah, i have te software and connector for the programing. not a problem. but what wires do the black and white from the pb-6 connect to?
white rice is offline   Reply With Quote
Unread 01-15-2011, 01:12 PM   #6
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,072
Default Re: Help...Please!

Small terminals 1 and 2
scottyb is online now   Reply With Quote
Unread 01-15-2011, 03:40 PM   #7
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Help...Please!

does it matter which color goes where? i assume you are talking about on the controller right? thanks scottyb
white rice is offline   Reply With Quote
Unread 01-15-2011, 05:49 PM   #8
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,072
Default Re: Help...Please!

Yes the controller and no it does not mater which color goes to which terminal so long as the black and white go to controller terminal 1 and 2 and the controller is programed for 0-5k throttle input.... cuz if it's not ~ you are going to get full throttle when you turn the key on and touch the gas.... savy?
scottyb is online now   Reply With Quote
Unread 01-15-2011, 06:32 PM   #9
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Help...Please!

Whoa
white rice is offline   Reply With Quote
Unread 01-15-2011, 06:43 PM   #10
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Help...Please!

O. By the way. What do i do with the rest of the wires in the harness that are not being used? Cut um and tape um up? I got some tape.
white rice is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes



All times are GMT -5. The time now is 04:00 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.