lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-15-2011, 01:29 PM   #1
Not Yet Wild
 
Chrisspy's Avatar
Club Car
 
Join Date: May 2009
Location: Green Bay WI
Posts: 34
Default lights on a 48 volt CC

Can somebody give me some info on how to wire up lights on 48 volt CC? I have everything in there including the voltage reducer, there are 2 wires coming out of one side of the reducer and one coming out of the other side, I bekieve that one goes to the negative side of the battery pack. Then I have a white wire and red wire with a inline fuse going to the switch. I need to know which wire from the reducer goes the battery and which wire gets hooked up the switch
Chrisspy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-16-2011, 12:04 PM   #2
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: lights on a 48 volt CC

look at this http://www.buggiesgonewild.com/attac...r-inverter.jpg

Are U sure it only has 3 wires , NOT 4 ?

Did U not get a wiring Diag .
Do U have a link to the sellers page.
GLEEMO is offline   Reply With Quote
Unread 01-16-2011, 12:48 PM   #3
Not Yet Wild
 
Chrisspy's Avatar
Club Car
 
Join Date: May 2009
Location: Green Bay WI
Posts: 34
Default Re: lights on a 48 volt CC

I just got a diagram from the co I got it from, and I did have it right, thanks for the reply though!
Chrisspy is offline   Reply With Quote
Unread 01-16-2011, 08:44 PM   #4
Gone Wild
 
golfcarfixer's Avatar
Club Car
 
Join Date: Sep 2009
Location: DELAWARE
Posts: 2,656
Default Re: lights on a 48 volt CC

The one single wire goes to the main neg. battery cable and the other is for your light after the switch.You should have a wire with a fuse that goes to the pos. sideof the 16 volts on your battery.Then you should have 2 black wires coming out also and they get hooked up to the other side of the reducer.I usually cut the ends off and twist them together and hook them up so you dont have a lot of excess wire.
golfcarfixer is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
12 volt battery to run lights Electric EZGO
Lights with 12 volt battery Electric Club Car
what volt lights/lite switch ect...Do I need Electric EZGO
12 volt lights for TXT Electric EZGO
12 volt ground for lights Electric EZGO


All times are GMT -5. The time now is 08:21 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.