lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-06-2011, 01:36 PM   #31
Not Yet Wild
 
Join Date: Jan 2010
Posts: 69
Default Re: why does my 04 48vCC pulse in power

hi damo

will it works fine if you drive up to a high hill ?

and only pulse if run on flat ?

think you have wrong #field map in that controller
Carryone is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-06-2011, 06:14 PM   #32
just leave me alone
 
GLEEMO's Avatar
Club Car
 
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
Default Re: why does my 04 48vCC pulse in power

OK this is not rocket science !
If it worked OK before the upgrade !
So it is something which came in the package
probably not cables, probably not resistor , diode , solenoid or fuse
so that leaves motor and controller

replace new with old, 1 at a time whichever one fixes it , then the new one is funky
GLEEMO is offline   Reply With Quote
Unread 02-07-2011, 10:13 AM   #33
Not Yet Wild
 
Join Date: Jan 2011
Posts: 25
Default Re: why does my 04 48vCC pulse in power

guesss so. you can hear motor quit when pulsing starts. it worked fine before i added kit. i did not put diode in. would that cause problem?
damo is offline   Reply With Quote
Unread 02-07-2011, 01:31 PM   #34
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: why does my 04 48vCC pulse in power

In the kit you indicated according to BUGGIES you should have gotten a diode and resistor along with solenoid? The RESISTOR ( goes across large cable terminals on solenoid ) is to precharge the filter capacitors in controller to reduce arcking of contacts. The DIODE ( goes across small terminals with color band toward battery side of solenoid ) is to act as a one way switch stopping up to 150 volts of power flowing back into solenoid when power is turned off. Some solenoids come with diode built in, but usually is indicated on solenoid or in literature that comes with solenoid.
BOTH are very important to life of solenoid and controller.
OLD MEC is offline   Reply With Quote
Unread 02-09-2011, 11:07 AM   #35
Not Yet Wild
 
Join Date: Jan 2011
Posts: 25
Default Re: why does my 04 48vCC pulse in power

thanks. i hope i didnt fry anything. this may have something to do with my problem. i thank you for your help and time.
damo is offline   Reply With Quote
Unread 05-06-2013, 09:52 PM   #36
Not Yet Wild
 
Join Date: May 2013
Posts: 1
Default Re: why does my 04 48vCC pulse in power

I have a 2001 EZGO 36v and I was in reverse and switched to forward without stopping and now all I get is a pulse in power (forward and reverse). ?
tstapleton is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Pulse Desulfators: Fact or Fiction? Electric golf carts
pulse pump solution Big Block Talk!
91 Marathon Pulse coil Gas EZGO
Has anyone heard of a Power Pulse battery maintainer Electric Club Car
Has anyone heard of a Power Pulse battery maintainer Electric EZGO


All times are GMT -5. The time now is 09:56 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.