Press gas and nothing!!!

med_11

i apologize in advance if this has been asked and answered already, but......

i have a used 2002 club cart, brand new batterys ran great no issues before parts install.

i finish installing the jakes lift kit, tires, and then installed new 4g cables, tightened and made sure not loose,

then i unbolted black cable to box thingy (not sure what its called) to clean and remove any corrosion. then re bolted and applied red battery post spray.

i pluged charger in and it started charging, i then decided to move cart and put key in put the switch to F and pressed gas and CLICK and no movement, i tried R and nothing same thing CLICK, i thought maybe cause the battery charger was on so i unplugged it and tried the F and nothing only CLICK same with R.

then i thought maybe battery dead but charge seemed okay.

the only thing i can think of is when i worked on the rear part of the lift kit i unplugged this plug that went from the cart to the motor (on the right side)
the inner part of the plug popped out, so i popped it back in... and re plugged once done. i made sure it was properly plugged.

any suggestions?...

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

down under

Have U any pics of this pluggy thing,
pics help all the guys to trouble shoot

langstonjones

If you had to drop the axle for lift kit install you may want to check connections on motor. I have read numerous posts on here about people not disconnecting motor and let it hang by the cables and messing up cable ends. I see where you upgraded cables. If you replaced cables after lift kit you would have most likely caught this. If so, this is just an exercise of futility.

my $.02

med_11

OK are you guys ready for the answer to my fix.....

I will automatically register myself for TOOL OF THE DAY AWARD.

well last night all i could be thinking about< **** WHAT CAN IT BE, i read all these post about FNR switch failing, computer going bad etc, so i fiqured it had to be something like this, anyways as i was brushing my teeth this morning EUREKA! i bet it was because i never switched it off TOW.. and low and behold it was simply that, i tried it out this morning and it ran fine.


Sorry guys for wasting your times but thanks very much for the support. this forum is amazing for that and i am greatful to be a part of this community!

Cheers and enjoy your FRIDAY!!!!!

lockman1

Just to let you know... your not the only one that "that" has happened to!

I'm glad your back up and running!

shadowman

nice when its just something we forgot to do........................

GLEEMO

Glad we got that solved