Modified Precedent Pedal Sensitivity

teckersley · 03-31-2011, 01:13 PM

Now that I have the charging issue resolved, I need some help with the "gas pedal". I have a modified motor, F/R, wires, etc that produce around 35mph on GPS with two people riding. Now my problem is that the accelerator pedal is very ultra sensitive meaning that just barley a touch and the cart wants to go and starts jumping around. There is also very little speed choices between 0 and full. One slip of the foot and its full speed ahead. I was wanting to know if there is some sort of device that can be either added to the pedal to creates some sort of friction to allow eaiser control or some other device making a more controlled acceleration/deceleration.

OLD MEC · 03-31-2011, 03:03 PM

I would check your pedal linkage for wear as so often the bearing ( bushing ) brackets that hold pedal shaft are not lubricated correctly and wear down at angle toward spring tension. It might also be that your pedal return spring got weak and allow much softer pedal action?

sonicj · 03-31-2011, 04:08 PM

a programmable controller would be the simplest solution. ie alltrax axe, dcx

GLEEMO · 04-01-2011, 09:51 AM

If U have a IQ cart with Factory controller,
this MAY be something inside one of the controllers parameters which could be set ? Ask your local CC dealer ?

Carryone · 04-01-2011, 11:37 AM

what controller you have on 35mph ?

teckersley · 04-02-2011, 07:44 AM

Quote:

Originally Posted by Carryone

what controller you have on 35mph ?

Alltrax 600 with new motor, F/R, solenoid, and 2ga wires

GLEEMO · 04-02-2011, 09:39 AM

Quote:

Originally Posted by teckersley

Alltrax 600 with new motor, F/R, solenoid, and 2ga wires

So is it the 600 Axe ??? Please be more specific ?

Carryone · 04-02-2011, 12:40 PM

on Alltrax you can change trottle respons with your computer

look at this picture.. http://www.alltraxinc.com/images/Con...n-Throttle.gif

cheapjeep2 · 04-03-2011, 07:39 AM

You need to download the Alltrax Controller Pro software and get a USB to Serial cable. The Alltrax IQ controller that you have has two areas were can adjust the sensitivity, the throttle response where you can adjust the throttle curve, and the throttle up and down rate which determines how fast the power is applied to the system.

teckersley · 04-03-2011, 07:13 PM

Quote:

Originally Posted by Carryone

what controller you have on 35mph ?

The controller has DCX or maybe its DXC printed on it.

03-31-2011, 01:13 PM	#1
teckersley Not Yet Wild Join Date: Jan 2009 Location: Houston, Tx. Posts: 55	Modified Precedent Pedal Sensitivity Now that I have the charging issue resolved, I need some help with the "gas pedal". I have a modified motor, F/R, wires, etc that produce around 35mph on GPS with two people riding. Now my problem is that the accelerator pedal is very ultra sensitive meaning that just barley a touch and the cart wants to go and starts jumping around. There is also very little speed choices between 0 and full. One slip of the foot and its full speed ahead. I was wanting to know if there is some sort of device that can be either added to the pedal to creates some sort of friction to allow eaiser control or some other device making a more controlled acceleration/deceleration.

03-31-2011, 03:03 PM	#2
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: Modified Precedent Pedal Sensitivity I would check your pedal linkage for wear as so often the bearing ( bushing ) brackets that hold pedal shaft are not lubricated correctly and wear down at angle toward spring tension. It might also be that your pedal return spring got weak and allow much softer pedal action?

03-31-2011, 04:08 PM	#3
sonicj Gone Wild Join Date: Oct 2010 Location: Panama City, FL Posts: 1,408	Re: Modified Precedent Pedal Sensitivity a programmable controller would be the simplest solution. ie alltrax axe, dcx

04-01-2011, 09:51 AM	#4
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: Modified Precedent Pedal Sensitivity If U have a IQ cart with Factory controller, this MAY be something inside one of the controllers parameters which could be set ? Ask your local CC dealer ?

04-01-2011, 11:37 AM	#5
Carryone Getting Wild Join Date: Jan 2010 Posts: 90	Re: Modified Precedent Pedal Sensitivity what controller you have on 35mph ?
Carryone Getting Wild Join Date: Jan 2010 Posts: 90

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-02-2011, 12:40 PM	#8
Carryone Getting Wild Join Date: Jan 2010 Posts: 90	Re: Modified Precedent Pedal Sensitivity on Alltrax you can change trottle respons with your computer look at this picture.. http://www.alltraxinc.com/images/Con...n-Throttle.gif
Carryone Getting Wild Join Date: Jan 2010 Posts: 90

04-03-2011, 07:39 AM	#9
cheapjeep2 Gone Wild Join Date: Nov 2008 Location: Peachtree City, Georgia Posts: 1,546	Re: Modified Precedent Pedal Sensitivity You need to download the Alltrax Controller Pro software and get a USB to Serial cable. The Alltrax IQ controller that you have has two areas were can adjust the sensitivity, the throttle response where you can adjust the throttle curve, and the throttle up and down rate which determines how fast the power is applied to the system.

Similar Threads
Thread	Forum
05 Precedent...foot pedal wiring	Electric Club Car
Precedent pedal group maintenance	Electric Club Car
My G9 with modified muffler	Gas Yamaha
precedent foot pedal	Golf Carts and Parts
help w/ a modified series CC	Design Center