lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 04-13-2011, 02:10 PM   #11
Not Yet Wild
Club Car
 
Join Date: Aug 2008
Location: Central NY
Posts: 37
Default Re: 96 CC 48V series no move...

So I'll take it that that's a no... and I should remove all wires before trying to apply 48v to the small terminals to trigger the solenoid..?
hehhe
timgman is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 04-13-2011, 04:22 PM   #12
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: 96 CC 48V series no move...

No need to unhook wiring while jumpering for tests on that old a model but you wouldnt want to do that on IQ 2000 plus models.
OLD MEC is offline   Reply With Quote
Unread 04-14-2011, 10:20 AM   #13
Not Yet Wild
Club Car
 
Join Date: Aug 2008
Location: Central NY
Posts: 37
Default Re: 96 CC 48V series no move...

Yep the solenoid triggers so the solenoid is good..
I'll start testing the signal path this evening if I get a chance...
thanks..
Do I just see that the signal has voltage to the main ground along the path and try and find where it stops?
or do I chenk for continuity between the signal path and the pos terminal on the battery?
thanks
timg
timgman is offline   Reply With Quote
Unread 04-14-2011, 12:22 PM   #14
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: 96 CC 48V series no move...

if your jumping the soleniod and its working but not working when you press the pedal its bad chances arev you need to replace it.................
shadowman is offline   Reply With Quote
Unread 04-14-2011, 12:42 PM   #15
Not Yet Wild
Club Car
 
Join Date: Feb 2011
Location: dublin ^.^
Posts: 35
Default Re: 96 CC 48V series no move...

measure the high side of the solenoid, make sure its roughly 48.

if the high side aint getting its voltage your activation circuit has lost its voltage.

one thing you can do is directly wire +48V onto the high side of the solenoid to power up the activation circuit. it happened to me and that fixed it :)

my problem was caused by grounding a PLC to the common on the cart circuit which dropped it out. search my posts and you'll find an attachment in here that might help you identify the different circuits and also what wires do what.
DIT Mobile is offline   Reply With Quote
Unread 04-14-2011, 12:43 PM   #16
Not Yet Wild
Club Car
 
Join Date: Aug 2008
Location: Central NY
Posts: 37
Default Re: 96 CC 48V series no move...

Hehe I guess I may be saying som confusing things here...

1. If I jump the 2 LARGE posts on the solenoid it works...
2. If I trigger the solenoid via the small terminals (48 v) it activates the solenoid and works...
I'm guessing that the post with the wiring diagram on page one of this post has my answer..
Whatever tells the solenoid to "trigger 48v" to the solenoid is not working..
the microswitches are working so it must be elsewhere.
Thanks :)
Are there any other obvious (easy i hope) things to test?
thaks
again :)
timgman is offline   Reply With Quote
Unread 04-14-2011, 12:44 PM   #17
Not Yet Wild
Club Car
 
Join Date: Aug 2008
Location: Central NY
Posts: 37
Default Re: 96 CC 48V series no move...

Quote:
Originally Posted by DIT Mobile View Post
measure the high side of the solenoid, make sure its roughly 48.

if the high side aint getting its voltage your activation circuit has lost its voltage.

one thing you can do is directly wire +48V onto the high side of the solenoid to power up the activation circuit. it happened to me and that fixed it :)

my problem was caused by grounding a PLC to the common on the cart circuit which dropped it out. search my posts and you'll find an attachment in here that might help you identify the different circuits and also what wires do what.
Will do ..

Thanks a bunch :)
timgman is offline   Reply With Quote
Unread 04-14-2011, 12:50 PM   #18
Not Yet Wild
Club Car
 
Join Date: Feb 2011
Location: dublin ^.^
Posts: 35
Default Re: 96 CC 48V series no move...

sticky this : 98-99 powerdrive plus papers

check this out and see attachment. if it looks similar to yours i may be able to help out a good bit.

have you measured the signals going in/coming out of the OBC?

what type of controller are u using? 16 pin or 23 pin?
DIT Mobile is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
dcs vs series Electric EZGO
E-Z-GO TXT: PDS vs. Series Electric EZGO
97' Series DS no go Electric Club Car
(HELP)TXT fleet series will not move Electric EZGO
6x6V series or 2x3x12V Series/parallel Electric golf carts


All times are GMT -5. The time now is 06:43 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.