|05-01-2011, 08:19 PM||#1|
Join Date: Apr 2011
I'm making an adapter that plugs into the motor speed sensor harness, this adapter doubles the speed from ( mine) 11 mph to 21 mph. This is for a stock club car electric, will not ?? work with any unit set for #4 speed setting (unless you feel it cutting out) or any motor that has altered the speed sensor. This unit will make the cart act like it's set for setting 4, but I have put a switch on the unit which allows you to select the stock setting that your cart is set up for now, plus setting 4.
I live on a hill and I like the motor break going down ( stock setting with stop sign at bottom ) also when the kids use it I will have it set for the stock setting. sorta a turbo switch.
I will be having circuit boards made and can make xtra if there is any interest total cost should be around 50 - 60 dollars. it will have the plugs that the speed sensor and wiring have so it just plugs between the existing sensor plug. It will have a 3 positions toggle sw. that can be mounted on the bottom of the dash,
Positions 1 stock setting 2 speed sensor off and 3 Turbo.
I have tested it on a 2006 precedent I think i'm in mode 3 but could be 2.
if interested private message me it will be a few weeks before I have the boards made.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|mode 4, motor break, speed sensor, turbo mode|
|Oil sending unit wire||Gas EZGO|
|Plowman's Unit on Sport 2+2 ???||Electric EZGO|
|WTB: Reed Valve unit - 3PG||Golf Carts and Parts|
|plowmans posi unit||Electric EZGO|
|Rack & Pinion Unit||Electric EZGO|