Displayed Controller Info

gaminde

Would there be any need or interest, in a device that was either hand held or dash mount that could read the data from the controller stuff like below (but not all of it).
maybe a one line lcd screen with a up down toggle you could keep it on bat voltage or heatsink temp. maybe in the 150.00 to 200.00 dollar range. not sure what controllers would work!! it works with the curtis controller in my 06 precedint. most curtis controllers have the same protocol.

THROTTLE 0 %
BATT VOLTAGE 49.0 Volt
HEATSINK 20 deg C
ARM CURRENT 0
FIELD CURRENT 0.2
ARM PWM 0
FIELD PWM 0
SPEED PULSES Off
FOOT INPUT Off
FORWARD INPUT Off
REVERSE INPUT Off
MAIN CONT Off
KEY INPUT Off
PASSWORD TRIES 5
10.3 TRANSAXLE Off
20+ SPEED Off
HW FAILSAFE # 0
FLD MISSING # 0
OVERVOLTAGE # 0
MAIN DROPOUT # 0
M COIL FAULT # 0
MOTOR STALL # 0
HI SPD WAWAY # 0
MAIN DR ON # 0
MAIN WELDED # 0
THRTL FAULT # 0
SPD SENSOR # 0
KEY SW SRO # 0
MAIN DR OFF # 0
OPEN ARM # 0
PROC/WIRING # 0
HPD # 1
UNDERVOLTAGE # 0
TEMP CUTBACK # 0
MAX PASSWORD # 0
INC PASSWORD # 0

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum