lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-09-2011, 11:53 PM   #1
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: Wahiawa, Hawaii
Posts: 76
Default FSIP Install question

I have the FX503 mounted to my precedent but I had to cut the electronics box on the back of the battery box to get it to fit.

Is it ok if the controller gets wet during operation?... there is a possibility that it could get splashed but probably not drenched..

Also, the instructions say to remove the diode on the solenoid so I did.. the cart works fine but I just wanted to make sure I didn't need the diode...

thanks
ripdis85 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-10-2011, 07:22 AM   #2
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: FSIP Install question

Well....they are supposedly sealed, I have washed mine I just don't spray the controller directly. I wouldn't worry too much about it getting splashed a little. Dont completely submerge it.
roady89 is offline   Reply With Quote
Unread 06-10-2011, 07:46 AM   #3
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: FSIP Install question

all i can tell you is i can,t tell you how many people washed their carts and after doing so cart wouldn,t run for up to 3 days until controller dried out......that tells me it ain,t that water proof................................
shadowman is offline   Reply With Quote
Unread 06-10-2011, 08:27 AM   #4
72 volt torque monster
 
scottginfla's Avatar
Club Car
 
Join Date: Dec 2009
Location: Sorrento, FLA
Posts: 589
Default Re: FSIP Install question

The fx 503 is a sealed unit unlike the alltrax which is not, you will be fine.
The instructions say to remove the diode, so you are fine.
scottginfla is offline   Reply With Quote
Unread 06-12-2011, 05:04 PM   #5
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: Wahiawa, Hawaii
Posts: 76
Default Re: FSIP Install question

Quote:
Originally Posted by scottginfla View Post
The fx 503 is a sealed unit unlike the alltrax which is not, you will be fine.
The instructions say to remove the diode, so you are fine.
thanks scottginfla... I figured it was sealed because of the rubber grommets on the terminals and rubber seal for the main wire harness...

it shouldn't get too wet because its on the back of the battery box and I have a 6 inch lift also..
ripdis85 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Mounting FSIP 500amp on Precedent Electric Club Car
500A FSIP Cotroller Install In My Precedent Members Rides
Ez go txt - LED install question? Gas EZGO
OBC install question Electric Club Car
Install question on Jakes Lift for G22 Gas Yamaha


All times are GMT -5. The time now is 01:24 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.