lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-23-2011, 09:43 PM   #1
Not Yet Wild
 
Join Date: Jun 2011
Posts: 2
Default Wiring on/off switch on 36volt CC with V glide

Hello All. I am new to this and, of course, have a problem. Our cart is a 2000 DS with new batteries and a new solenoid. ( former owner put it on). Problem is that the on/off switch does nothing. I even took it off and the cart runs. I am wondering if the switch is wired up wrong. The blue goes to the micro switch on the forward/reverse switch and the red goes to the forward .reverse switch except it is attached to the post where the red battery lead comes in. Is this correct? If so, what could account for the cart always being on?
pond creek farm is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-23-2011, 09:47 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: Wiring on/off switch on 36volt CC with V glide

That red positive you say goes from battery pack to micro? Run it up to the key switch (2 terminal) and then back down to the same place it goes now.... that's it you will be able to turn the cart on & off with the key

Welcome to BGW!
scottyb is offline   Reply With Quote
Unread 06-23-2011, 10:05 PM   #3
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Wiring on/off switch on 36volt CC with V glide

welcome to BGW.....................................
shadowman is offline   Reply With Quote
Unread 06-23-2011, 10:13 PM   #4
Not Yet Wild
 
Join Date: Jun 2011
Posts: 2
Default Re: Wiring on/off switch on 36volt CC with V glide

I am not sure I understand (not uncommon). The key red wire is attached to the same place on the f/w sitch as the thick red wire coming off the battery. Is that where it should be? Should I run another wire up to the switch so that there are two red and one blue? Sorry to be thick headed. BY the way, grat forum. I really enjoy reading it.
pond creek farm is offline   Reply With Quote
Unread 06-23-2011, 10:33 PM   #5
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: Wiring on/off switch on 36volt CC with V glide

Maybe I'm not being clear?

Take the red wire which is the battery positive main source for the F&R micro switch and pull it off......... bingo ~ the cart wont run. Correct? that is the wire which needs to go to the key switch and be turned on and off
scottyb is offline   Reply With Quote
Unread 06-24-2011, 12:36 AM   #6
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Wiring on/off switch on 36volt CC with V glide

scotty i like your new style where the avatar is......slick....................
shadowman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Speed Switch vs V-Glide Electric Club Car
V-Glide Switch Electric Club Car
Used Wiring Harness 94 G9E 36volt electric Electric Club Car
87 EZ-Go 36volt wiring help\verification Electric EZGO
36volt ez-go wiring help\ trouble shooting. Electric EZGO


All times are GMT -5. The time now is 04:25 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.