|06-30-2011, 06:49 PM||#1|
Not Yet Wild
Join Date: Jun 2011
voltags on 48v club car motor
I have a 95 club car ds 48v. I put the car in reverse and backed up about 15 feet and parked it. About ten minutes later i got on and put it in foward and it did not go. I knew it was time for new batteries but i knew that was not the problem. I bought a set of batteries and installed them and it still does not go. I can hear all the slenoids clicking when i turn the switch and when i give it gas. my question is i am checking the voltages on the motor but i dont know what i should be reading across the post A1, A2,F1 and F2.
Can anyone tell me what i should read and which post to read across.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|06-30-2011, 07:31 PM||#2|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Re: voltags on 48v club car motor
I don't know what those voltages would be but you can connect your DVM to the battery pack and check your standing voltage and then hit the gas and try to go.... tell us what it falls to... if it does not fall you may have a bad connection or solenoid not engaging ?
|Club Car Motor||Golf Carts and Parts|
|36v club car motor?||Electric Club Car|
|89 club car motor||Gas Club Car|
|WTB Club Car 36v motor||Golf Carts and Parts|
|90 Club Car motor ?||Electric Club Car|