Floor Mat Replacement

jbcampy · 07-02-2011, 09:21 AM

How do I remove the floor mat in a 1996 Club Car Presedent?
Thanks

gsp041 · 07-02-2011, 09:51 AM

JB,
Are you sure that it is a Precedent? Don't believe they started building those until 2004. On the Precedent, there are 2 or 3 screws along the outside edge of the mat that have to be removed and 1 screw on lower rear edge of the trim piece that holds the mat in place that also needs to be removed. Then carefully remove the trim piece. It is held in place with a series of snaps that comes off fairly easily.

jbcampy · 07-02-2011, 04:33 PM

JB, sorry, I meant a 2006 Precedent. Thanks for you help!

scubabud · 07-02-2011, 11:24 PM

I just remove the 2 star screws on each side and gently pull the mat out while lifting the panel above the mat that was held down by the screws. The mat itself has slotted holes where the screws are, allowing it to actual come out even without removing the screws completely. I still remove them to let me lift the molding up a bit more. That's all that's needed to accomplish it.

jbcampy · 07-03-2011, 10:36 AM

JB, thanks again!!

07-02-2011, 09:21 AM	#1
jbcampy Not Yet Wild Join Date: Jul 2011 Posts: 5	Floor Mat Replacement How do I remove the floor mat in a 1996 Club Car Presedent? Thanks
jbcampy Not Yet Wild Join Date: Jul 2011 Posts: 5

07-02-2011, 09:51 AM	#2
gsp041 Not Yet Wild Join Date: Jul 2010 Location: West Georgia Posts: 44	Re: Floor Mat Replacement JB, Are you sure that it is a Precedent? Don't believe they started building those until 2004. On the Precedent, there are 2 or 3 screws along the outside edge of the mat that have to be removed and 1 screw on lower rear edge of the trim piece that holds the mat in place that also needs to be removed. Then carefully remove the trim piece. It is held in place with a series of snaps that comes off fairly easily.

07-02-2011, 04:33 PM	#3
jbcampy Not Yet Wild Join Date: Jul 2011 Posts: 5	Re: Floor Mat Replacement JB, sorry, I meant a 2006 Precedent. Thanks for you help!
jbcampy Not Yet Wild Join Date: Jul 2011 Posts: 5

07-02-2011, 11:24 PM	#4
scubabud Ban Puppy Mills & Stores! Join Date: Dec 2008 Location: SE Florida Posts: 2,955	Re: Floor Mat Replacement I just remove the 2 star screws on each side and gently pull the mat out while lifting the panel above the mat that was held down by the screws. The mat itself has slotted holes where the screws are, allowing it to actual come out even without removing the screws completely. I still remove them to let me lift the molding up a bit more. That's all that's needed to accomplish it.

07-03-2011, 10:36 AM	#5
jbcampy Not Yet Wild Join Date: Jul 2011 Posts: 5	Re: Floor Mat Replacement JB, thanks again!!
jbcampy Not Yet Wild Join Date: Jul 2011 Posts: 5

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Floor Mat? Ideas? Different?	Electric Club Car
INSTALLING a new FLOOR MAT	Gas Club Car
81 g1 floor mats	Gas Yamaha
new floor pan?	Electric EZGO
Floor Mats?	Golf Carts and Parts