lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-26-2011, 03:39 AM   #11
Gone Wild
 
Join Date: Dec 2010
Posts: 458
Default Re: wireing

Quote:
Originally Posted by jim777 View Post
got the cart running but it half speed in forward full speed in reverse any help would be great thx jim
The 1/2 speed reverse is achieved thru a 5.1k resistor in the throttle wiring.On the outer microswitch of the fwd/rev there are 3 terminals the top has a green wire the middle black and the lower white. The black has the resistor. Try switching the middle and bottom wire. see sonics wiring diagram.
Golfdog is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-26-2011, 12:01 PM   #12
Gone Wild
Club Car
 
Join Date: May 2009
Location: roseville , michigan
Posts: 196
Default Re: wireing

sorry did not post they are 87 electronics
jim777 is offline   Reply With Quote
Unread 07-26-2011, 12:29 PM   #13
Ban Puppy Mills & Stores!
 
scubabud's Avatar
Club Car
 
Join Date: Dec 2008
Location: SE Florida
Posts: 2,945
Default Re: wireing

jim777, I just spoke with TahoeDawg and he stated that all you need to do is change the wire on the S1 post on the motor to the S2 post on the motor and vice versa.
scubabud is offline   Reply With Quote
Unread 07-26-2011, 01:17 PM   #14
Gone Wild
Club Car
 
Join Date: May 2009
Location: roseville , michigan
Posts: 196
Default Re: wireing

thx for the info ill try it thx jim
jim777 is offline   Reply With Quote
Unread 07-26-2011, 01:35 PM   #15
Gone Wild
Club Car
 
Join Date: May 2009
Location: roseville , michigan
Posts: 196
Default Re: wireing

now im getting full speed forward but the selector is in reverse and half speed reverse with the selector in forward
jim777 is offline   Reply With Quote
Unread 07-26-2011, 02:44 PM   #16
Gone Wild
 
Join Date: Dec 2010
Posts: 458
Default Re: wireing

Quote:
Originally Posted by jim777 View Post
now im getting full speed forward but the selector is in reverse and half speed reverse with the selector in forward
All that that did was reverse the motor. I think the problem was misunderstood. Wish I cud help furthe.r
Golfdog is offline   Reply With Quote
Unread 07-26-2011, 04:19 PM   #17
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,997
Default Re: wireing

Quote:
Originally Posted by jim777 View Post
now im getting full speed forward but the selector is in reverse and half speed reverse with the selector in forward
Swap the wires back like you had them, and switch the middle and bottom wire on the Half speed micro switch. It's the one closest to the battery pack.
TahoeDawgZ71 is online now   Reply With Quote
Unread 07-26-2011, 04:20 PM   #18
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,997
Default Re: wireing

Sorry Scuba, didn't mean to misinform. Wasn't aware that he was running an EZGO motor. I'm assuming it's on an EZGO transaxle as well, which is completely opposite from our stuff as far as which direction the motor attaches from.
TahoeDawgZ71 is online now   Reply With Quote
Unread 07-26-2011, 05:43 PM   #19
Gone Wild
Club Car
 
Join Date: May 2009
Location: roseville , michigan
Posts: 196
Default Re: wireing

it is on a par car rearend will it screw anything up to run it like it is
jim777 is offline   Reply With Quote
Unread 07-26-2011, 06:36 PM   #20
Ban Puppy Mills & Stores!
 
scubabud's Avatar
Club Car
 
Join Date: Dec 2008
Location: SE Florida
Posts: 2,945
Default Re: wireing

Quote:
Originally Posted by TahoeDawgZ71 View Post
Sorry Scuba, didn't mean to misinform. Wasn't aware that he was running an EZGO motor. I'm assuming it's on an EZGO transaxle as well, which is completely opposite from our stuff as far as which direction the motor attaches from.
Not your fault... I forgot to tell you the whole story... my bad... but at least he did get full forward and half in reverse

Most importantly thanks for jumping in and helping Jim777... that was my real concern and you did just that
scubabud is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wireing diagram Gas EZGO
Wireing Diagrams Electric golf carts
wireing tip Garage and Workshop
Problems Wireing Lights Electric EZGO


All times are GMT -5. The time now is 11:02 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.