power wise 28115 go4

buggygonewrong

I have a power wise 36v charger and it has power to the cord 110 in and the transformer is humming . with a volt meter i have 39.2 volts on the back side of the aluminum plate witch has what looks to be a fusible link on one side of the meter with a 50 on it and the other side is attached to the plate with what looks like 2 theremo connectors with 2 wires to the transformer and charging wire . now with a volt meter it reads 39.2 v on the back side of the plate but not on the charging side and the ammeter does not show anything the batteries will only charge up to 35.0 volts and no more . any help would be appreciated

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

shadowman

welcome to BGW..........are you trying to say charger isn,t working? when its plugged in the ampmeter on charger isn,t moving? its staying at 0 ? but you can hear the charger humming?? ..........................................

buggygonewrong

yes and ive since located the 50 amp fuse and its blown would like to talk to some one about this my number is 1-812-828-9581

sonicj

the stock fuse is crap. i replaced mine with a glass AGU fuse.

fuse

holder

buggygonewrong

the timer board was burnt out and the diodes were replaced and hooked it up to cart and blew the fuse again . so i run the volt ohm meter one more time made sure the white wire on p + and black wire on the battery was N - SO i checked the voltage at the charger end and showed -36.6 volts ???????? . so i moved back to the plug on the cart and found that the wires inside the plug had been crossed and switched at the cart plug so when running the continuity from white to white wire i had no continuity but black to white . I HAVE CONTINUITY so lesson learned don't believe the one selling that they used the charger on there cart and it worked fine !