lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-31-2011, 12:18 PM   #1
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Location: Jax
Posts: 15
Default Alltrax 500A controller...cant get 100% throttle

I just installed a new Alltrax 500iq and had to do some testing with it to get it from bucking like a bronco. It seems to start off pretty good now, but i cant seem to get above around 88% throttle running the software. With the stock controller, i was getting around 28-30mph on gps. Now im topping out around 26mph. Any ideas?
cummerpt is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-31-2011, 01:08 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,081
Default Re: Alltrax 500A controller...cant get 100% throttle

Are you sure you have the correct throttle selected .... and 100% output selected?
scottyb is offline   Reply With Quote
Unread 07-31-2011, 02:23 PM   #3
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Location: Jax
Posts: 15
Default Re: Alltrax 500A controller...cant get 100% throttle

I have Club Car 5k-0, 100% throttle and turbo selected. Anything im missing?
cummerpt is offline   Reply With Quote
Unread 07-31-2011, 02:27 PM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,081
Default Re: Alltrax 500A controller...cant get 100% throttle

You didn't say what year your cart is but I'm betting you have the MCOR throttle.

Go back into the program and select MCOR throttle device.
scottyb is offline   Reply With Quote
Unread 07-31-2011, 02:54 PM   #5
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Location: Jax
Posts: 15
Default Re: Alltrax 500A controller...cant get 100% throttle

Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)
cummerpt is offline   Reply With Quote
Unread 07-31-2011, 03:28 PM   #6
Gone Wild
 
sonicj's Avatar
Club Car
 
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
Default Re: Alltrax 500A controller...cant get 100% throttle

how much deadband do you have before the software starts to show throttle movement?
sonicj is offline   Reply With Quote
Unread 07-31-2011, 03:44 PM   #7
Gone Wild
 
Join Date: Dec 2010
Posts: 458
Default Re: Alltrax 500A controller...cant get 100% throttle

Quote:
Originally Posted by cummerpt View Post
Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)
On the Control Panel page have you ticked the switch box marked Turbo. This gives extra speed once 100% is reached, provided you are not over current.
Golfdog is offline   Reply With Quote
Unread 07-31-2011, 03:57 PM   #8
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Location: Jax
Posts: 15
Default Re: Alltrax 500A controller...cant get 100% throttle

Yes i do have that checked...but the problem is that I cant get to 100% throttle. Pedal to the floor only registers as around 88% on the controller. Is there a way of adjusting the pedal/MCOR?
cummerpt is offline   Reply With Quote
Unread 07-31-2011, 04:01 PM   #9
Gone Wild
Club Car
 
Join Date: Apr 2011
Location: Texas
Posts: 600
Default Re: Alltrax 500A controller...cant get 100% throttle

put you ohm meter across the mcor output and see if its giving full output first then you can pin down the problem.
gaminde is offline   Reply With Quote
Unread 07-31-2011, 05:03 PM   #10
Gone Wild
 
TDAWG's Avatar
 
Join Date: Jul 2009
Location: East Texas
Posts: 311
Default Re: Alltrax 500A controller...cant get 100% throttle

Quote:
Originally Posted by cummerpt View Post
Hey Scotty, thanks for your help. I dont have an option in the program for MCOR. There are eight throttle sensor types listed. I have Club Car 5K-0 selected. (I have an 08 Precedent)
Im sure someone asked this already but do you have a 2008 Precedent IQ, or a 2008 Precedent i2? On the IQ, the stock controller would have been black. On the i2, the stock controller would have been gray.
TDAWG is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Controller upgrade question? 500A or 650A Electric EZGO
Fs: alltrax 500a for parts Golf Carts and Parts
Getting ready for 36v/48v conversion & 500a Controller etc install Electric EZGO
Will I see much difference in a 500a from a 400a controller? Electric EZGO
'02 PDS - do I need a 500A controller? Electric EZGO


All times are GMT -5. The time now is 05:10 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.