|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-07-2011, 03:24 PM | #1 |
Not Yet Wild
Join Date: Jun 2010
Posts: 6
|
alltrax controllers
Has anybody had any problems installing the axe controller on clubcar? Factory curtis working fine and replace with alltrax, but cart don't move. Done sent controller back they said nothing was wrong with it, so i have checked all the wiring diagrams and still i must be missing something. Can anybody help with this?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-07-2011, 04:13 PM | #2 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: alltrax controllers
pics? the alltrax does wire a little different and i don,t know if it works with a V-glide......i just put an alltrax in mine with a curtis potbox ( got rid of V-glide ) and runs smotth as silk..............................
|
08-07-2011, 04:40 PM | #3 |
Not Yet Wild
Join Date: Jun 2010
Posts: 6
|
Re: alltrax controllers
It is a 02 clubcar ds series and not sure how to attach pics. I have yellow/green to B+, blue to M-, and black/red/white/purple to B-, pin 1 has red wire, pin 2 throttle green, pin 3 throttle yellow, pretty much wired just like my curtis. Also was asked if there was 50+ volts on pin 1 and there is when foot pedal is press.
|
08-07-2011, 05:03 PM | #4 |
Gone Wild
Join Date: Apr 2010
Location: Interlachen,Fl
Posts: 326
|
Re: alltrax controllers
not sure if this will help you or not but it's worth a try...... http://www.alltraxinc.com/files/Doc1...tall-Guide.pdf
|
08-07-2011, 05:04 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: alltrax controllers
Are you certain the throttle input on the Alltrax is set to 0-5k ? Can you check it?
|
08-07-2011, 06:09 PM | #6 | |
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: alltrax controllers
Quote:
-sj |
|
08-08-2011, 02:31 PM | #7 |
Getting Wild
Join Date: Jan 2010
Posts: 90
|
Re: alltrax controllers
hi
do you have AXE or DCX ? look at the lamp on controller it will flash and give you error code |
08-08-2011, 02:39 PM | #8 |
Getting Wild
Join Date: Jan 2010
Posts: 90
|
Re: alltrax controllers
now i see you have AXE
maybe lamp will not flash ? you can have a problem with your wire from foot switch and controller will not have a signal before it powered up try with a wire directly from your key output to controller pin1 if so you can have foot switch to start main contactor only |
08-08-2011, 02:50 PM | #9 |
Gone Wild
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
Re: alltrax controllers
Did you order the Alltrax ( Model AXE or NPX which is used on SERIES MOTORS ) set up for 5K-0 ohms MCOR pedal speed control which is stock on later model CC's?
I find often that many people order the wrong unit either for Shunt Motor and most common pedal input of 0-5K ohms. |
08-08-2011, 03:58 PM | #10 |
Getting Wild
Join Date: Jan 2010
Posts: 90
|
Re: alltrax controllers
yes
The LED Blink Codes occur at power up controller the number of green blinks indicates the throttle configuration: 1 Green LED flash = 0-5 kohm resistive 2 Green LED flashes = 5K-0 ohm resisitive 3 Green LED flashes = 0-5 Volt 4 Green LED flashes = EZ-GO inductive (ITS) 5 Green LED flashes = Yamaha 0-1K ohm resistive 6 Green LED flashes = Taylor-Dunn 6-10.5 Volt 7 Green LED flashes = ClubCar 5k-0 ohms, 3-wire throttle |
|
|
Similar Threads | ||||
Thread | Forum | |||
opinions on alltrax controllers | Electric EZGO | |||
controllers | Electric golf carts | |||
2 Controllers??? | Extreme DC! | |||
400 AMP Alltrax Controllers $195! | Golf Carts and Parts |