|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-11-2011, 10:16 AM | #1 |
Not Yet Wild
Join Date: Aug 2011
Posts: 4
|
Programming Curtis Controller Model 1510A-5251
Hi All,
I am writing regarding a question about a Curtis controller installed in my club car. Curtis instruments advised me that the Controller Model 1510A-5251 is exclusive to club cars and that all programmed info is programmed by club car. Has anyone been successful in programming a Curtis Controller Model 1510A-5251? Thanks! Any help is appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-11-2011, 02:12 PM | #2 |
Gone Wild
Join Date: Apr 2011
Location: Texas
Posts: 600
|
Re: Programming Curtis Controller Model 1510A-5251
I have done a 5150 06 unit
|
08-16-2011, 03:36 PM | #3 |
Not Yet Wild
Join Date: Aug 2011
Posts: 4
|
Re: Programming Curtis Controller Model 1510A-5251
Were you able to use the stock programming interfaces such as the Model 1311 LP Handheld Programmer or Model 1314 PC Programming Station, or did you use another method?
|
08-16-2011, 04:01 PM | #4 |
Gone Wild
Join Date: Apr 2011
Location: Texas
Posts: 600
|
Re: Programming Curtis Controller Model 1510A-5251
PM me I will help you set it up
|
08-22-2011, 01:53 PM | #5 |
Not Yet Wild
Join Date: Aug 2011
Posts: 4
|
Re: Programming Curtis Controller Model 1510A-5251
Thanks gaminde, unfortunatley I don't have the pm option yet, how do i obtain it or can we email?
|
08-22-2011, 02:05 PM | #6 |
Gone Wild
Join Date: Apr 2011
Location: Texas
Posts: 600
|
Re: Programming Curtis Controller Model 1510A-5251
Once your logged on go to user cp and setup to allow pm
|
08-23-2011, 03:34 PM | #7 |
Not Yet Wild
Join Date: Aug 2011
Posts: 4
|
Re: Programming Curtis Controller Model 1510A-5251
Hmm, that worked, but now it said that you werent recieving pm.
Can you try to pm me? Thanks for your help with this, its really appreciated |
06-10-2012, 11:32 AM | #8 |
Not Yet Wild
Join Date: Jun 2012
Posts: 1
|
Re: Programming Curtis Controller Model 1510A-5251
I'd really like some help with this as well. I have been looking all over for this. I feel like i'm not the only other person either. So out of curiosity, why instead of doing it over PM, don't you guys make this information public?
|
10-02-2012, 11:11 AM | #9 |
Not Yet Wild
Join Date: Aug 2012
Location: Ca
Posts: 7
|
Re: Programming Curtis Controller Model 1510A-5251
Same problems. I have the Curtis 1311 handheld and connected to model 1510a-5250 controller. It will only show basic details. Cannot get to sud-menus to change parameters. Have not been able to find an answer.
|
10-02-2012, 06:06 PM | #10 |
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Re: Programming Curtis Controller Model 1510A-5251
There are 2 versions of the 1311. Club Car refers to them as IQDM Series 2 which is what you have and IQDM Series 2 (P) which the P stands for Programmable. The regular version has all the diagnostic features without a lot of the actual programming features. Its really silly because they are both about the same price but the P is almost impossible to get unless your a dealer.
|
Tags |
conrtoller, curtis, program |
|
|
Similar Threads | ||||
Thread | Forum | |||
Programming Curtis Controller | Electric golf carts | |||
WTB: Will Pay $40 for Curtis 1510A-5250 Manual/Schematic | Golf Carts and Parts | |||
Curtis Controller Programming Dongle | Golf Carts and Parts | |||
Curtis 1510A-5250 Motor Controller | Electric Club Car | |||
programming curtis ac controller | Electric Club Car |