97 cc Jumpy at start

daballowes2

I had to replaice the pot box under my cart. I found the old one had broken and went forward but in reverse it crept. I put a new factory cc pot box in. It now works. My problem is that now when you accelerate the cart at first kicks to full speed then goes to normal speed after the initial push of the accelerator. Is there an adjustment to the pot box controler that I need to make to fix this problem. Everything worked perfectly until I changed the box out. The housing had been cracked and I didnt want to get to a campground and then it stop working. So I replaiced the box. Anybodies knowledge would be greatly appreciated.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

That's weird. Are you describing a full throttle start and then the cart goes slower as you push the gas?

shadowman

after this oddball start up does it operate right or is this everythime you hit the pedal it starts and than backs off????..........................

daballowes2

What happened was i accidently broke the switch in the pot box. I replaiced with A new stock cc pot box. When you push the pedal it jumps up and goes at top speed. if you keep pressing on the pedal it levals out and goes at the right speed. This happens in forward and reverse. before i broke the switch the cart worked perfect. Does the actuator lever need to be adjusted or is the micro switch bad. would the micro switch make it jump like that?

shadowman

it shouldn,t.............i,m trying to follow what your saying .....when you got the new pot did they ask if it was a 5K to 0 or a 0 to 5K???? it should have been set but i suppose it could be out of adjustment this is not a strong suit for me...................................

daballowes2

No they didnt ask. I am going to test tom. and see how its set. They asked what year and make the cart was. She ordered the part. I looks just like the box i took off. I did notice the flat plate on the pivot rod ***. was bent a little. I re bent back flat. the carts works just bucks at first push of the pedal. I have all new batteries. and cables.