lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-18-2011, 06:39 AM   #1
Not Yet Wild
 
Join Date: Jul 2011
Posts: 10
Default 2007 precedent stops at full pedal

I have a 2007 precedent IQ series cart.
Initially, it would not run at all. I changed the speed controller and still the same, so I changed the MCOR unit and now it will run but only about two thirds throttle. I also changed out the speed sensor. Any ideas?
elcombs is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-18-2011, 06:59 AM   #2
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,543
Default Re: 2007 precedent stops at full pedal

Quote:
Originally Posted by elcombs View Post
I have a 2007 precedent IQ series cart.
Initially, it would not run at all. I changed the speed controller and still the same, so I changed the MCOR unit and now it will run but only about two thirds throttle. I also changed out the speed sensor. Any ideas?
Check for wear between GO pedal and MCOR input shaft where the "fork" from the input shaft meets the GO pedal . . . you should be able to see this by looking down from top of vehicle behind GO pedal . . . my 06 DS has wear at this point and required a shim at this mesh point to achieve full throttle (temp fix until I bring it home for winter) . . . some have used tubing over the "fork" for the forward motion to do same . . . good luck!
Stevegrmich is offline   Reply With Quote
Unread 08-18-2011, 07:42 AM   #3
Not Yet Wild
 
Join Date: Jul 2011
Posts: 10
Default Re: 2007 precedent stops at full pedal

Thanks Steve, but I can't detect any wear. I hope am looking in the right place. I thinkyou are talking about the shaft that goes into the MCOR unit.
elcombs is offline   Reply With Quote
Unread 08-18-2011, 08:48 AM   #4
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,543
Default Re: 2007 precedent stops at full pedal

Quote:
Originally Posted by elcombs View Post
Thanks Steve, but I can't detect any wear. I hope am looking in the right place. I thinkyou are talking about the shaft that goes into the MCOR unit.
Yes . . where the MCOR shaft mates with the GO pedal, viewing from above . . . there should be positive contact there with no space between pedal and MCOR "fork" . . . MCOR shaft should start to rotate with pedal instantly when depressed . . . mine did not rotate until pedal was almost half way to floor boards . . . it only takes 1/32" or less of space to create issues with being able to obtain full throttle . . .
Stevegrmich is offline   Reply With Quote
Unread 08-18-2011, 09:44 AM   #5
Not Yet Wild
 
Join Date: Jul 2011
Posts: 10
Default Re: 2007 precedent stops at full pedal

I get an immediate response when I depress the pedal. Any other thoughts?
Thanks
elcombs is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
05 precedent stops suddenly then starts working again Electric Club Car
EZ go just stops with slight hum when pedal is down Electric EZGO
Pedal stops working after a while Electric EZGO
Slows Down, Then Shutters at Full Pedal Electric Club Car


All times are GMT -5. The time now is 10:18 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.