lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-31-2008, 08:42 PM   #1
Not Yet Wild
 
Join Date: Feb 2008
Posts: 29
Default Help needed on a 98 club car

I am working on a 98 club car thats a carryall car its a 48 volt system. I put new batteries in and they read 48.9 volts. turn key on push peddle just pedel microswitch clicks. check seloniod no voltage across two small terminals when pedal is pushed. short out two big terminals on seloniod and push peddle runs good slow med. fast just cant seam to get the selonid to click it has a onboard computer wonder if thats the problem fuses in the terminals both at the computer and the peddle are good. is there any for sure way to check these computers in the club car or not

Thanks for any help Pat
wkola is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-01-2008, 12:56 AM   #2
Just me. .
 
phasetim's Avatar
Club Car
 
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
Default Re: Help needed on a 98 club car

Your OBC has a lockout feature to prevent driving while charging. You can bypass it fairly easily provided it is a series car (has a forward reverse handle, not a rocker switch)

Simply create a jumper wire from the negative side of your solenoid(small yellow wire) to the b(-) post of the controller.
phasetim is offline   Reply With Quote
Unread 06-01-2008, 06:30 AM   #3
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,093
Default Re: Help needed on a 98 club car

Just a side note here; if you read 48.9 volts accross your 48v pack it is empty! Not good to drain em below this. Each cell makes 2.5 volts. A totally charged pack could read as hot as 60v. Yours will get stonger over the first 10 or 12 cycles. So, 8v in an 8v battery is empty.
scottyb is offline   Reply With Quote
Unread 06-01-2008, 10:10 AM   #4
Not Yet Wild
 
Join Date: Feb 2008
Posts: 29
Default Re: Help needed on a 98 club car

Thanks for the replies Guys
Sure glad to have youall here
Hope I can return the favor some day
Thanks Pat
wkola is offline   Reply With Quote
Unread 06-03-2008, 05:23 PM   #5
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: Help needed on a 98 club car

if your jumping the solenoid and its running than replace the solenoid and be done with it..........its not the OBC if it works when jumping the solenoid..............
shadowman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2002 club car owners manual needed Electric Club Car
G1 help needed Gas Yamaha
pargo help needed Electric golf carts
CNC Programmer Needed Announcements
needed Golf Carts and Parts


All times are GMT -5. The time now is 07:55 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.