![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
Thread Tools | Display Modes |
![]() | #1 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() I got a 2005 cc precedent with new solenoid, controller,full charge on 4 12volt batteries, good forward switch, Good tow/run switch. Still doesn't work!! What could it be? |
![]() | ![]() |
![]() | |
![]() __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
![]() | #2 |
The Last Moja Morani ![]() ![]() Join Date: Jan 2007 Location: jumping from cart to cart
Posts: 8,975
| ![]() does soleniod click when you press pedal?.................................. ![]() |
![]() | ![]() |
![]() | #3 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() Yes |
![]() | ![]() |
![]() | #4 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() Reverse buzzer works too |
![]() | ![]() |
![]() | #5 |
revolutiongolfcars.com ![]() ![]() Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 9,166
| ![]() Motor most likely. Check for continuity with an ammeter. You should have continuity between A1 and A2..... and F1 and F2..... with no continuity between any post and the base of the motor or any A to F post. |
![]() | ![]() |
![]() | #6 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() So your saying....check continuity by putting the volt meter on continuity and put the red lead on f1 & black lead on f2 on the motor? And the same for A1 & A2? I should have continuity or not? Sorry for me not understanding. Last edited by XtremeGolfCarts; 09-06-2011 at 09:30 PM.. Reason: Mispelled |
![]() | ![]() |
![]() | #7 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() So your saying....check continuity by putting the volt meter on continuity and put the red lead on f1 & back lead on f2 on the motor? And the same for A1 & A2? I should have continuity or not? Sorry for me not understanding. Is this suppose to be done in tow or run? |
![]() | ![]() |
![]() | #8 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() Is this test suppose to be done in tow or run |
![]() | ![]() |
![]() | #9 |
Gone Wild ![]() Join Date: Sep 2010 Location: Angleton,TX.
Posts: 166
| ![]() I checked for continuity put the black lead on B+ off the controller which is the big green cable and put the red cable off the volt meter and touched each cable off the motor and got continuity not changing the black lead off the green cable. Is this mean I got a bad motor? Last edited by XtremeGolfCarts; 09-06-2011 at 10:33 PM.. Reason: Adding more description |
![]() | ![]() |
![]() | #10 |
Mr. Helper ![]() Join Date: May 2009 Location: NY Catskills & South carolina
Posts: 437
| ![]() note the motor test should be done with all wires disconnected ..so you don't read information backfed from the controller |
![]() | ![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() | ||||
Thread | Forum | |||
2005 gas club car precedent,,motor won't turn over | Gas Club Car | |||
2005 Club Car Precedent only 13 mph top speed | Gas Club Car | |||
2005 Club Car Precedent won't go | Electric Club Car | |||
2005 precedent club car | Electric Club Car | |||
2005 stock Club Car Precedent For Sale | Golf Carts and Parts |