lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-17-2011, 10:02 AM   #11
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Solenoid, speed switch assembly?

I think I failed to find out which pedal speed control your cart has? The problem is that several different pedal controls could be used on your year cart?
The correct original pedal speed control is a white box with red ends with micro switches inside, or a replacement later model pie shaped black unit mounted under drivers seat between the batterys. Try removing ( one ) of the ( small wires ) going to your passenger side solenoid and see if you still have the same problem? This is eliminating the micro switches and wiring from the white box with red ends that have micro switches inside.
It also could be a defective solenoid ( we are seeing more and more of them from after market field sources that way ).
Sorry it looks like its going to be a process of elimination if the above does not solve the problem.
OLD MEC is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-17-2011, 10:39 AM   #12
Not Yet Wild
 
Join Date: Sep 2011
Posts: 21
Default Re: Solenoid, speed switch assembly?

It is the white / gray box with red caps that has switches inside. I took it out and it looks like all of the switches are operating correctly, as far as I can tell.

I took a wire off the passenger side solenoid, but the problem does not change.

Could the resistors have anything to do with it? There are three resistor coils behind the solenoids. They feel rigid and look like they are in tact.
ttidan2 is offline   Reply With Quote
Unread 09-17-2011, 11:12 AM   #13
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: Solenoid, speed switch assembly?

Did you test the micro switches? You can't tell much by looking unless the arm is broken? With the meter set to continuity connect to both terminals on a switch and test the on/off feature.
scottyb is offline   Reply With Quote
Unread 09-17-2011, 11:13 AM   #14
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: Solenoid, speed switch assembly?

( PM ) Private Message sent
OLD MEC is offline   Reply With Quote
Unread 09-17-2011, 11:52 AM   #15
Not Yet Wild
 
Join Date: Sep 2011
Posts: 21
Default Re: Solenoid, speed switch assembly?

I have not checked continuity on the switches. I will pull the box back off and try that.
ttidan2 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Forward/Reverse Switch Assembly Electric EZGO
5 solenoid club car with speed switch Electric Club Car
wiper switch assembly ? Electric Club Car
1987 Club Car Speed Switch Assembly Electric Club Car
Main Switch Assembly Gas Yamaha


All times are GMT -5. The time now is 05:30 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.