lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-19-2011, 11:53 PM   #21
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,015
Default Re: Will this motor work

Quote:
Originally Posted by eldabo View Post
Those are some good people there but they only have 48 v motors and besides i have a 2007 rear for the car and the old one is a 1980 not worth rebuilding
I would imagine with their knowledge and expertise they'd be able to wind a motor for any voltage.
TahoeDawgZ71 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-19-2011, 11:57 PM   #22
Not Yet Wild
 
Join Date: Aug 2011
Posts: 24
Default Re: Will this motor work

Me to but thats what they said I need a 36 v core and they dont have any
eldabo is offline   Reply With Quote
Unread 09-20-2011, 07:47 PM   #23
Not Yet Wild
 
Join Date: Aug 2011
Posts: 24
Default Re: Will this motor work

Quote:
Originally Posted by shadowman View Post
i can,t tell from the pics you posted but if you need a 4 lug motor a 3 motor with 3 lugs isn,t gonna work.........i don,t know whos telling you that a high speed motor will work with a resistor setup but its going to melt the resistors and may in fact melt the cables if they are standard 6 gage......slow down take your time and do this right or its gonna be costly......................
Thanks for your input ,but the main guy at plum quik said it will work fine . A high speed motor is just gonna use what you give it power wise .The bottle neck is the resistors and thats only when the thing is not wide open. I do how ever need a 36 v motor 48 will not work


David
eldabo is offline   Reply With Quote
Unread 09-21-2011, 03:10 AM   #24
Gone Wild
 
sonicj's Avatar
Club Car
 
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
Default Re: Will this motor work

you see this?
sonicj is offline   Reply With Quote
Unread 09-21-2011, 01:44 PM   #25
Not Yet Wild
 
Join Date: Aug 2011
Posts: 24
Default Re: Will this motor work

thanks
eldabo is offline   Reply With Quote
Unread 09-28-2011, 12:11 AM   #26
Not Yet Wild
 
Join Date: Aug 2011
Posts: 24
Default Re: Will this motor work

Got my new rear end and motor in . 6.1 hp @4600 rpm works like a dream . top speed on level is 27mph by my GPS . 36 volt is plenty fast and climbs the small hills i have like crazy. So for now I'm happy . The resistor wire does not get any hotter than it did with the 2 hp motor. It does seem to pull the batts down more on the same amount of run time . I need to get a bat gauge .What are your thought on this ?


David
eldabo is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Will this motor work??? Electric EZGO
295 motor is in need of work where to start? Gas EZGO
Would this work to show amp draw of a motor. Electric Club Car
Would or could this work for a clockwise motor swap? Gas Club Car
will this motor work?? Gas Yamaha


All times are GMT -5. The time now is 07:32 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.