lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-25-2011, 03:58 PM   #1
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Posts: 65
Default 2006 club car precedent

up graded the solenoid and motor controller...48volt and 500 amp.....I can identify where the resistor is placed on the solenoid (from big nut to big nut), but where does the diode go?
dracor is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-25-2011, 04:03 PM   #2
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: 2006 club car precedent

small post to small post with the silver band towards positive..........................
shadowman is offline   Reply With Quote
Unread 09-25-2011, 04:32 PM   #3
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Posts: 65
Default Re: 2006 club car precedent

thanks Tom!
dracor is offline   Reply With Quote
Unread 09-25-2011, 05:33 PM   #4
Gone Wild
 
Colbyntx's Avatar
Club Car
 
Join Date: Jun 2010
Location: East Texas
Posts: 602
Default Re: 2006 club car precedent

Got it running yet? Results? You did get 4 or 2 ga wires also, right?
Colbyntx is offline   Reply With Quote
Unread 09-25-2011, 07:26 PM   #5
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Posts: 65
Default Re: 2006 club car precedent

yes...I got 4g wire but made the mistake of listening to someone that said it was a precident model, when in fact it is a ds....now I have to find out if the solenoid and motor controller along with the diode and resistor need to be exchanged....what is your impression
dracor is offline   Reply With Quote
Unread 09-25-2011, 09:04 PM   #6
Gone Wild
 
Colbyntx's Avatar
Club Car
 
Join Date: Jun 2010
Location: East Texas
Posts: 602
Default Re: 2006 club car precedent

If the controler and you got was for a shunt CC (F/R rocker switch), then it should be fine. The solenoid won't know the difference. They should both have the 5k-0 MCOR. How can yo get a DS and Precedent confused? They look night and day different.
Colbyntx is offline   Reply With Quote
Unread 09-25-2011, 09:41 PM   #7
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Posts: 65
Default Re: 2006 club car precedent

Got them confused cause it was a used cart and I listened to my golfing brotherinlaw.....it wasn't until I got the controller ordered when I looked at the website and saw the president had the bumper guard all the way around the body....my cart does have a f/r toggle switch. The hd solenoid and diode/resistor doesn't need to switch out too does it?
dracor is offline   Reply With Quote
Unread 09-25-2011, 09:56 PM   #8
Gone Wild
 
Colbyntx's Avatar
Club Car
 
Join Date: Jun 2010
Location: East Texas
Posts: 602
Default Re: 2006 club car precedent

It should all be the same as far as controller, solenoid, resistor & diod. Post your carts full serial # and we can tell you exactally what you have. Should be in the passanger side glove box area. What controller did you order?
Colbyntx is offline   Reply With Quote
Unread 09-26-2011, 02:42 AM   #9
Not Yet Wild
Club Car
 
Join Date: Sep 2010
Posts: 65
Default Re: 2006 club car precedent

AQ0651-711115 it was the alltrax 500 amp programmmable controller....thanks
dracor is offline   Reply With Quote
Unread 09-26-2011, 08:52 AM   #10
Gone Wild
 
Colbyntx's Avatar
Club Car
 
Join Date: Jun 2010
Location: East Texas
Posts: 602
Default Re: 2006 club car precedent

Quote:
Originally Posted by dracor View Post
AQ0651-711115 it was the alltrax 500 amp programmmable controller....thanks
Your cart is a 48V IQ system. The parts your ordered for a Precedent will all be the same in this case. You got lucky! You should also be able to get the battery cables to work. Remember, anytime you remove a cable from the motor, use 2 wrenches! You dont want to spin that stud! My craftsman 9/16's wouldn't fit under the lug so I bought a cheap 9/16 from northern tools and put it on a grinder until it fit.
Colbyntx is offline   Reply With Quote
Reply

Tags
diode/resistor placement
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2006 club car precedent Golf Carts and Parts
Club Car Precedent 2006- Speed Electric Club Car
2006 Club Car Precedent Electric EZGO
2004 / 2006 precedent club car Electric Club Car
2006 Club Car Precedent speed Gas Club Car


All times are GMT -5. The time now is 11:02 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.