lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-08-2011, 10:35 PM   #1
Gone Wild
 
carguy's Avatar
Club Car
 
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 234
Smile OBC -48 wiring 2005 Precedent

Hi Gang,

Got a 2005 Precedent and trying to figure out the - 48 black wires comming out of the OBC. These are two wires that appear together comming out of the OBC. They are NOT the big black wire that passes thru the OBC.

One of the wires runs to the B- on the controler, and the other wire has an off white spade terminal on it, and that is the wire I cannot figure where it goes.

Doing the 6 - 8volt battery conversion, and I labeled all the wires, but missed the one with the spade terminal on it.

I would appreciate any help you can provide - THANKS.

Dave
carguy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-08-2011, 10:44 PM   #2
haveacupofshutthe****up
 
Stevec3201's Avatar
Club Car
 
Join Date: Jun 2011
Location: Viera, FL
Posts: 739
Default Re: OBC -48 wiring 2005 Precedent

Quote:
Originally Posted by carguy View Post
Hi Gang,

Got a 2005 Precedent and trying to figure out the - 48 black wires comming out of the OBC. These are two wires that appear together comming out of the OBC. They are NOT the big black wire that passes thru the OBC.

One of the wires runs to the B- on the controler, and the other wire has an off white spade terminal on it, and that is the wire I cannot figure where it goes.

Doing the 6 - 8volt battery conversion, and I labeled all the wires, but missed the one with the spade terminal on it.

I would appreciate any help you can provide - THANKS.

Dave
Does this help?
Attached Images
File Type: jpg IMG_0071.jpg (168.4 KB, 22 views)
Stevec3201 is offline   Reply With Quote
Unread 11-09-2011, 08:58 AM   #3
Gone Wild
 
carguy's Avatar
Club Car
 
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 234
Smile Re: OBC -48 wiring 2005 Precedent

Steve3201,

THANKS for the reply. The black wires that are in question are on the controller (the little square device, that has the negative battery cable passing thru it).
The wiring diagram that I found on another post is very hard to read, but I'm thinking the black wire with the connector goes to the charge recepticle, and the other black goes to the B- on the controller.

I would greatly appreciate anybody's thoughts.

Thanks, Dave
carguy is offline   Reply With Quote
Unread 11-09-2011, 09:06 AM   #4
Gone Wild
 
erict's Avatar
Club Car
 
Join Date: Sep 2011
Location: East Michigan
Posts: 1,305
Default Re: OBC -48 wiring 2005 Precedent

Quote:
Originally Posted by carguy View Post
Steve3201,

THANKS for the reply. The black wires that are in question are on the controller (the little square device, that has the negative battery cable passing thru it).The wiring diagram that I found on another post is very hard to read, but I'm thinking the black wire with the connector goes to the charge recepticle, and the other black goes to the B- on the controller.

I would greatly appreciate anybody's thoughts.

Thanks, Dave
That is your OBC, not your controller.
erict is offline   Reply With Quote
Unread 11-09-2011, 09:44 AM   #5
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: OBC -48 wiring 2005 Precedent

the wires and cable from OBC the 6 gage cable runs from the neg. terminal of last battery thur OBC and to B- of controller the 10 gage black wire runs from the back of the charge receptical to B- of controller.....the small gage wires most of them run to B- of controller you can tell by the ring terminals on the end of them............i,m not sure about your cart but any wires that don,t go to the controller either go to the solenoid small post you,ll have the real small ring terminals on the ends of wires...........if you have a wire with a spade connector just look for the other part of it ( the part it plugs into ) there should only be one wire with a spade connector.............................
shadowman is offline   Reply With Quote
Unread 11-09-2011, 09:44 AM   #6
Gone Wild
 
carguy's Avatar
Club Car
 
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 234
Default Re: OBC -48 wiring 2005 Precedent

erict,

Yep, you are correct - my bad.

Anyhow, I ran accross an old post by scottyb from 7-9-2009, and it explains the function of the wires from the OBC. It is as I thought: 1 wire goes to the charger receptacle, and one goes to the B- on the controller.

Dave
carguy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wiring help 2005 C/C Precedent Electric Club Car
2005 Precedent wiring help Electric Club Car
2005 Precedent Wiring Diagram Electric Club Car
Need 2005 Precedent Wiring Diagram Electric Club Car


All times are GMT -5. The time now is 09:32 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.