|11-14-2011, 04:28 PM||#1|
Not Yet Wild
Join Date: Sep 2011
Location: Darwin, Australia
EZGO- Alltrax controller
I have recently installed a couple of Alltrax DCX units in EZGO TXT carts. The units work well but I am concerned over the cramped fit when I put the controller cover back on. Has anyone come up with a simple solution ie. a spacer between the heatsink and the cover.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|11-14-2011, 06:03 PM||#3|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Re: EZGO- Alltrax controller
Do not put the stock environmental cover on the Alltrax or any other aftermarket controller.
The environmental cover is meant to keep moisture off of the stock Curtis Control. It is not water resistant.
All aftermarket controls are potted in resin = water resistance. the environmental cover will not serve any good purpose on the aftermarket control and may in fact inhibit proper cooling and cause heat to build up, which would cause a problem.
We have been cutting the environmental cover in half or less and installing only the top half (or less) for PDS & DCS carts that need a place to mount the run tow switch.
|Need help wiring Alltrax Controller on 1995 EZGO||Electric EZGO|
|Alltrax Controller||Golf Carts and Parts|
|Alltrax 500 amp controller help for EZGO series TXT||Electric EZGO|
|Does anyone have pics of an alltrax controller installed on an EZGO PDS?||Electric EZGO|
|WTB Alltrax Controller, But....||Electric EZGO|