|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
11-27-2011, 12:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2011
Location: ILLINOIS
Posts: 21
|
03 cc ds iq axle removal for new disc brakes
i just wanted to know if anyone has put disc brakes on there cc ds. and what it takes to remove the rear axle. pics would help.
the brakes i bought are ausco ameri-torque. thanks for your help. this site has helped me alot |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-27-2011, 12:36 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 03 cc ds iq axle removal for new disc brakes
I have not done it but I do know it takes a very good pr of 90 degree snap ring pliers to remove the ring inside the tube to release the axle..... 90 degrees because you work behind the drum mounting flange on the axle to release the snap ring... In this pic you can see the snap ring hanging on the axle and the flange you will be working behind. A small flashlight will help you see what you are doing thru the hole in the flange. Hope this helps...
|
|
|
|
|
12-11-2011, 05:15 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2011
Location: ILLINOIS
Posts: 21
|
Re: 03 cc ds iq axle removal for new disc brakes
well today i got one side put on. it took 35 min to get the snap ring out. putting it back in was easy. does anyone know on a cc ds iq 2003 is the passenger brake cable longer than the drivers side? the drivers side sure is tight and i do have the bracket ext. also does anyone have the part # for the passenger side brake cable.
i had to stop i got cold in the garage i did not turn the heater on. it was 38 today in illinois. one more thing that my rims fit over the brakes yes thank god! if you need good snap ring pliers go to home depot and get channel locks $22 or $23. i will have pics soon. thanks |
|
|
|
|
12-11-2011, 05:44 PM
|
#4 |
|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 03 cc ds iq axle removal for new disc brakes
i beleive most guys replace the drivers side cable with a pass side cable as its longer...................................
 |
|
|
|
|
12-30-2011, 01:28 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2011
Location: ILLINOIS
Posts: 21
|
Re: 03 cc ds iq axle removal for new disc brakes
well i got the brakes on and new brake cables. i need to remove the u bolts and turn them upside down on the rear end by the lift blocks. i got the axle part done and took it for a drive and know there is a wine from the rear end. i checked the axles and the snap rings are in all the way. is there something i am missing. had to remove axles to put new brakes on.gear oil is full w 30w royal purple.
please let me know what i have done thanks |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Disc Brakes | Electric EZGO | |||
| Disc Brakes | Golf Carts and Parts | |||
| Disc Brakes | Electric EZGO | |||
| Disc Brakes | Design Center | |||
| Disc Brakes All Around | Golf Carts and Parts | |||
Linear Mode
