|11-30-2011, 07:02 PM||#1|
Join Date: Nov 2010
Location: East to Southeast,Texas
Toe in 2006 Presedent
My right side tire is showing alot of wear. The left side not as much the cart has a Jakes 6inch lift. What should the toe in be set at.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|12-01-2011, 01:26 PM||#4|
Join Date: Aug 2011
Location: La but staying in Houston most of the time
Re: Toe in 2006 Presedent
I never set the toe in on a Jakes Lift but I have set toe in for an AllSports. On a level concrete slab or deck with the wheels straight “Not turned”, use a framing square to check from top of the tire side wall to the bottom of the tire side wall with the square resting on the deck. You should have about 1/8” clearance on the lower side wall with the framing square resting flat on the slab or deck. I’m not sure if Jakes has an adjustment for this but it should. Adjust both tires as needed.
Now check the toe in. Tow in should be about 1/8”-3/16” less on the front of the inside tire side wall compared to the rear inside tire sidewall. This measurement is taken half way up the tire. If the measurement is incorrect. Loosen both tie rod ends and adjust both sides the same to get the correct measurement.
Hope this helps.
|07 presedent buzzer stays on||Electric Club Car|
|Best price for 6" Allsports A-arm lift for CC Presedent||Lifted Golf Carts|
|Presedent||Electric Club Car|
|Starting problems on my Presedent||Gas Club Car|
|2005 presedent IQ cart Problem||Electric Club Car|