|01-01-2012, 10:34 AM||#1|
Not Yet Wild
Join Date: Dec 2011
Forward/Reverse swithch on 95 DS
I have purchased a new forward/reverse swithch for the cart. The main part is a perfect match. The difference is the 3 micro switches on back. The orignal one starting from the switch has a 2 pin connector, the 2nd switch has a 2 pin connector and the 3rd switch has a 3 pin connector.
The new one starting from the switch has a 2 pin connector, the 2nd switch has 3 wires coming from the switch - red - blue - black with connectore on the end of the wires, the 3rd switch has a 2 pin connector.
Should I change the location of the new micro switches to make them 2-2-3 like the orignal?
How would you match up the 3 wires coming out of the 3 switch? I had marked the wires with numbers so I could plug them back into same location but the wires through me off unless you should use the way the colors come out the switch as top to bottom.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|01-01-2012, 10:36 AM||#2|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Re: Forward/Reverse swithch on 95 DS
yesjust re-arange your switches as for your wires look in the stickies for a wiring diagram ..............................................
|2006 ezgo forward is reverse and reverse is forward please help||Electric EZGO|
|Reverse alarm sounds in Forward, wont go forward or reverse||Electric Club Car|
|Reverse alarm stuck - motor won't run forward or reverse||Electric EZGO|
|Alarm sounding in forward. No movement in forward or reverse||Electric Club Car|
|Forward Reverse switch melted on forward...have question about replacement part||Electric Club Car|