lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-27-2012, 08:06 PM   #1
Not Yet Wild
 
Owen's Avatar
Club Car
 
Join Date: Jan 2011
Posts: 54
Default long prep, nearly ready for 48v?

My little workhorse has come a long way in just over a year, and served very well for most of it- cheers to this forum, It would have been MUCH different alone.
I have the AXE4844 almost in my hand. Ive got Scottys 4ga wire set, voltage meter and F/R switch in place, among other things that went bad or looked weak. I chose this controller because it seems I can keep 36v and vglide untill I can bite off another new pack( will go with 6x8v) and gain curb climbing torque until then.
The questions: This will work right?
after this, all I should need is the battery pack, 48v HD solenoid, and a PB6?
Can these Alltrax be plugged in and programmed while on the cart?
Unless I run across someone needing used batteries and possibly other stuff, it may be another year before I pull the trigger on this last step.
Owen is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-27-2012, 09:41 PM   #2
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: long prep, nearly ready for 48v?

Owen i beleive scotty has it programmed before its shipped out........................
shadowman is offline   Reply With Quote
Unread 01-27-2012, 10:19 PM   #3
Stay thirsty my friends!
 
gornoman's Avatar
Mixed Breed
 
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 25,042
Default Re: long prep, nearly ready for 48v?

The new stuff will work fine on 36v until you are ready for the big jump. The AXE controller can be re-programed while installed in the cart using the correct cable, software, and safety procedures.
gornoman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Welding prep Design Center
krylon no prep Body and Paint
paint prep Body and Paint
Paint prep question Gas EZGO
How to Prep my cart Electric EZGO


All times are GMT -5. The time now is 07:38 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.