|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-01-2012, 01:27 PM | #1 |
Getting Wild
Join Date: Apr 2011
Posts: 128
|
Cables backwards? PQ motor/A1-A2?
07 Precedent IQ. Had a stock controller and a Bandit motor. I'm replacing the stock controller with a Alltrax DCX and noticed, what appears to be, my cables were hooked up backwards on the stock controller/Bandit, which makes no sense.
A1 went to B+ then on to the solenoid A2 went to M- The wiring diagram for the DCX has them reversed. A1 going to M- and A2 going to B+ and the solenoid. I can't find the original install instructions for the Bandit and from recollection don't recall the directions saying to reverse the A1/A2 cables Below are the pics of the original set up. A1 (green) to B+ then on to the solenoid A2 (white) to M- For reference the lugs on the controller from left to right are: B+ (green cable) M- (White cable) and B- (various) black cables |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-01-2012, 02:25 PM | #2 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Cables backwards? PQ motor/A1-A2?
You have already inquired on the PlumQuick forums . . . did they answer yet?
|
03-01-2012, 02:29 PM | #3 |
Getting Wild
Join Date: Apr 2011
Posts: 128
|
Re: Cables backwards? PQ motor/A1-A2?
|
03-01-2012, 02:40 PM | #4 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Cables backwards? PQ motor/A1-A2?
|
03-01-2012, 02:49 PM | #5 |
Getting Wild
Join Date: Apr 2011
Posts: 128
|
Re: Cables backwards? PQ motor/A1-A2?
|
03-01-2012, 10:17 PM | #6 |
Not Yet Wild
Join Date: Jun 2011
Location: San Augustine, TX
Posts: 48
|
Re: Cables backwards? PQ motor/A1-A2?
I, too, have a 2007 Precedent with an Alltrax 500 amp controller. It sounds to me like you're looking at the little instruction brochure that came with the controller. That brochure has the wires backwards. I sent a note to Alltrax and they said those are generic instructions (I'm assuming that's code for OOPS) and said to follow the wiring diagram on their website. That diagram is correct.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Hooked up new cables, new motor, now I'm getting nothing... | Electric Club Car | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO | |||
2ga Motor & Controller Cables (Alone) | Electric EZGO | |||
Question about motor cables | Electric EZGO | |||
Protecting motor cables | Electric EZGO |