|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-23-2012, 10:22 PM | #1 |
Not Yet Wild
Join Date: Jan 2012
Location: East coast
Posts: 26
|
Alltrax program help
Have 2003 DS IQ and have similar issue with not getting 100 percent from controller when floored. Controller is new 600 alltrax and motor is DD 502 torque motor....Took the slop in peddle out and got around 85 percent. Checked mocar. And no issues but floored still showing 1.025 ohm. No orange light on controller and could not get o ohm at full throttle best was 1.025 floored. Alltrax sent me new hex ( thanks) file and got 100 percent and made big difference. Now the issue, i if I switch to s curve or any other curve. ( other than the new custom linear they sent that gives me the 100 percent output when floored) I go back to 90 percent at best max output. How can I get the s curve to give me the 100 percent output?... Like to have the more aggressive initial performance if I want to play a little harder. Looking for more aggressive program and still get the 100 percent output issue resolved. Can not imagine it would be that difficult since we know the 1.025 ohm is what is not letting controller give full power. Do I need alltrax to send me another hex with the same fix they applied . The new program works great and does finally get me to 100 percent but the linear they wrote has a very shallow initial take off performance. Given I have zero experience writing or making these files I am at the mercy of those who have the talent to write the programs to fix my problem. Truly appreciate all any any help. Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-24-2012, 07:00 AM | #2 |
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: Alltrax program help
Give the Alltrax guys a call and ask them to send another file with more aggressive take off.
|
04-24-2012, 08:11 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax program help
Reprogram the throttle ramp up rate.
What is it set at now? |
04-24-2012, 03:20 PM | #4 |
Not Yet Wild
Join Date: Jan 2012
Location: East coast
Posts: 26
|
Re: Alltrax program help
Scott, all the throttle setting are maxed out. I can not get the controller to give me 100 percent output except for the one new custom linear program alltrax wrote. All the others max out at 90 percent and verified by no orange light (and floored still 1.025 ohm showing) Called today, very nice and always......they said they could write more aggressive power curve and get me at 100 percent like the one they sent yesterday. Is there easy way to fix all the factory settings to adjust for that 1.025 ohm remaining and allow my controller to give me full power. ( or do I need alltrax to continue to write the custom programs)
|
04-25-2012, 02:56 PM | #5 |
Gone Wild
Join Date: Jul 2011
Location: Baton Rouge, LA
Posts: 155
|
Re: Alltrax program help
I believe you are in need of the Custom Throttle Curve file that specifically resolves this issue. I had the same problem and this fixed it right up! You can find this file on this thread -> "Throttle Curve to get to 100% on DS with DCX". I found other threads as well searching on "Alltrax Full Throttle Hex File".
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
36/48V HD Solenoid / alltrax program cable | Golf Carts and Parts | |||
IQ program setting on DS | Electric Club Car | |||
program an alltrax ? | Electric EZGO | |||
program alltrax | Electric EZGO |