|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-10-2008, 09:40 PM | #1 |
Not Yet Wild
Join Date: Oct 2007
Posts: 17
|
question about lift
Ok, I know I have asked this several times but I think I may have figured out something.... When a cart has a lift on it are the springs in the rear normally on the top of the axle. Mine are on the bottom.. I am trying to get the rear of the cart to sit a little higher off the tires. I was told that the leaf springs should be on the top of the axle.. if so, how would I go about this.. I have a 04 club car. If you have one that has the leaf springs on th top could you post a pic of it for me...thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-10-2008, 10:10 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: question about lift
'Jakes' makes a lift kit which remounts your springs on the top of the axle
If you need just the rear kit let me know.... |
07-10-2008, 10:50 PM | #3 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: question about lift
Stock the springs are on bottom of the axle. When a lift kit is installed the springs are on top of the axle.
|
07-11-2008, 06:38 AM | #4 |
Gone Wild
Join Date: Dec 2007
Location: Rhode Island
Posts: 281
|
Re: question about lift
Here is a pic of when I first put the Jake's flip kit on the rear of my Club Car....dont mind the grease and dirt...it is much cleaner now. Hope it helps.
|
07-12-2008, 04:58 PM | #5 |
Not Yet Wild
Join Date: Oct 2007
Posts: 17
|
Re: question about lift
Is that jakes rear kit welded on to the axle.? That looks like what I need.. I am trying to do this myself. What all would I have to do to get it done right..?
|
07-12-2008, 06:40 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: question about lift
Mechanically speaking, you should realize that to do this install you need jack stands and a floor jack. You will be taking the rearend out and putting it back in? If you are confident about that......Call our sponsors and order it up!
|
07-12-2008, 08:23 PM | #7 |
Master BS'r
Join Date: Jul 2007
Location: S. Florida
Posts: 1,819
|
Re: question about lift
nothing is welded under there....that you need to worry about. Aside from the shackles being fused with bolt in the mounts and need to drill them out, it's easy, buthey that's all the fun. Floor jack, jack stands, some air tools...that's the only drill that will fit to do the job. I had to sawzaw my bolts off and drill them out, maybe you'll get lucky. If ya need any help,...just post. Good luck.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
lift kit question | Gas Yamaha | |||
Question on installing my lift kit | Gas EZGO | |||
94 EZ-GO Electric Cart Lift kit question!!! | Lifted Golf Carts | |||
Lift Kit Question | Electric Club Car | |||
lift kit and tire question | Electric Club Car |