|05-16-2012, 03:43 PM||#1|
Not Yet Wild
Join Date: Oct 2011
98 CC 48v F/R switch
Have had problems w switch for some time. Have been reengineering southern style for quite awhile and at point where I need new switch. One of the floating copper contacts that is connected to the motor lead keeps melting and freezing into the plastic and therefore not making good contact. ?'s. 1. Where can I get one that can stand up to 48v. Do they make a switch for 48v or are they universal? 2. Can you purchase just the two pieces of the switch and reuse all the copper contacts? 3. Is it possible that the melting switch means there is a bigger problem elsewhere. 4. How many $'s can you expect a good quality switch to cost? Much obliged my friends.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|05-16-2012, 04:26 PM||#2|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Re: 98 CC 48v F/R switch
It is best to get a new switch, when the contacts heat up they soften or melt the housing, this lets the contact sink in the plastic housing and forever compromises the connect reducing the chance of a trouble free F&R.
THEY do make a HD F&R and we make one too
|2009 Precedent run/tow toggle switch replaced with keyed switch||Electric Club Car|
|forward/reverse switch change to toggle switch||Electric Club Car|
|Key switch & Kill switch question||Gas Club Car|
|Forward Reverse switch limit switch||Electric Club Car|
|Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!||Gas Yamaha|