|05-23-2012, 02:16 PM||#1|
Not Yet Wild
Join Date: Oct 2010
06 precedent hot
I have an 2006 precedent car no go
thought soleniod was bad but when checked and put back in car would run forward for 30 seconds. I then tried rev and no go - then soleniod also stopped engaging.
while i was thinking the resistor got so hot it melted the plastci cover before i put the tow switch on. any thoughts as to what maybe going on
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|05-23-2012, 08:47 PM||#2|
Dawg Gone Wild
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Re: 06 precedent hot
Either a short in the controller or the motor. You can eliminate the motor by a simple test. Unhook battery pack and put car in tow position. Unhook wires from motor. Get a multimeter and use the continuity test function and check for continuity between A1 and A2. You're looking for 100% continuity. Repeat process for F1 and F2. If there's continuity between any A post to any F post or any continuity from any of the 4 posts to the motor case replace the motor. If motor passes test, replace controller and the pre-charge resistor that melted.
|Precedent Help||Electric Club Car|
|My new Precedent||Electric Club Car|
|'06 or '09 CC Precedent......||Electric Club Car|
|06 Precedent||Members Rides|
|Cc Precedent||Electric Club Car|