cart has only one speed, wide open! help!!

remibeau

I Have A 92 Cc. New 2 Speed Emp Motor, 700 Amp Controller, 4 Guage Cables. New Micro Switches. If I Push My Petal Just The Slightest My Cart Jumps And Takes Off. Whiplash. If You Know What It Might Be Help A Brother Out. The Only Thing I Think It Could Be Is My Solenoid Or The Small Wires From The Micro Switches To Controller Or From My V-glide.. Help Me Please....

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

roady89

Check all your wiring. It won't be a solenoid unless it's wired wrong. Check the throttle circuit...might disconnect the throttle wires and see if it still takes off.

scottyb

And if you push the throtle all the way down ....does it slow down?

Fishing Dude

Should charge for rides. Cedar Point gets big $$$$ for pulling G's.
Do ur plates read hauling a$$.

BRS

Unless your cart was already converted to an Mcor, you have a problem with the "pot box". That would be my guess, you could replace it for around $150 or convert to an Mcor for around $200. My 95 was doing the exact same thing, felt like the motor was going to jump off the axel. Sound familiar.

remibeau

I'm Not Sure What A Pot Box Or Mcor Is? Are You Refering To My V-glide? I Have Rebuilt This Cart From The Ground Up. New Motor, Controller, Batt Cables, Micro Switches And F/r Switch. The Only Things That Are Old Are The V-glide, Solenoid, And The 14 Or 18 Guage Wires From The V-glide To The Solenoid And Controller. I Am About To Just Change Out Those Wires. I Have Looked At A Wire Diagram And Checked My Cart. Looks Right But I Can't Tell If Some Wire In The Wire Casing Is Crossed. Who Knows.

BRS

Black box under the gas pedal (underbelly of cart). Can you post a pic of your Vglide?