lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-21-2012, 03:14 PM   #1
Not Yet Wild
 
662tiger27's Avatar
Mixed Breed
 
Join Date: May 2010
Location: ms
Posts: 17
Default Club Car Series Controller + EZGO Series Wound Motor

Is is possibble to use these two together? I would be using the 5k to 0 throttle input that matches with the Silver Curtis controller off a 96' 48 volt club car. The motor is currently mounted on a 98 TXT Series EZGO cart. Basically I want to put the club car controller and throttle on the EZGO cart. Am I insane or is it possible to make it work?
662tiger27 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-21-2012, 03:18 PM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,096
Default Re: Club Car Series Controller + EZGO Series Wound Motor

Series is series, it will work. But check that controller size. Ezgo is heavier than CC and used a minimum of 275 amps to play golf. you may have a 225 or 250 amp control? ... anything else will require more power.
scottyb is offline   Reply With Quote
Unread 06-21-2012, 03:53 PM   #3
Not Yet Wild
 
662tiger27's Avatar
Mixed Breed
 
Join Date: May 2010
Location: ms
Posts: 17
Default Re: Club Car Series Controller + EZGO Series Wound Motor

Scotty B, i forgot to mention the EZGO Motor is a 36 volt motor. It will be running on a 48 volt system. The controller came off the 48 volt cart and is the 225 amp one. So will this setup work? Or still need more power?
662tiger27 is offline   Reply With Quote
Unread 06-21-2012, 04:03 PM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,096
Default Re: Club Car Series Controller + EZGO Series Wound Motor

Quote:
Originally Posted by 662tiger27 View Post
Scotty B, i forgot to mention the EZGO Motor is a 36 volt motor. It will be running on a 48 volt system. The controller came off the 48 volt cart and is the 225 amp one. So will this setup work? Or still need more power?

That makes a difference. While much smaller than anything I would recommend... if you are determined to use parts on hand ... it will work. It may not be impressive off the line or up the hill but, it will produce about 16 mph in a stock cart on the flat ground.
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
retrofit '86 series-wound motor from resistor-controller to...? Electric EZGO
EZGO TXT 36V Series - OEM Controller / Motor Golf Carts and Parts
What is the biggest amp controller I can use with my TXT Series stock motor? Lifted Golf Carts
OBCs, EZGO Series Controller, IQ Motor Golf Carts and Parts
EZ-go Marathon series or shunt wound motor? Electric EZGO


All times are GMT -5. The time now is 03:35 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.