|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-24-2012, 01:50 AM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 9
|
heavy duty lift kit
so when i bought my 8in heavy duty a arm lift kit my stock rear leave springs looked ruff and the the heavy duty lift kit was the same prive but had new leaf springs so i got it and now that its installed i HATE it. its such a ruff ride and my tire travel is terrible so i want to know some free ways to modify my lift to be as smooth and soft as i can possible get it. (i have access to all tool neccessary)
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-24-2012, 09:48 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: heavy duty lift kit
The heavy duty leaf springs are to blame. They're much stiffer. Take them off and replace them with stock single leaf springs if you're worried about the ride.
|
06-25-2012, 12:35 AM | #3 |
Not Yet Wild
Join Date: Jun 2012
Posts: 9
|
Re: heavy duty lift kit
i wouldve done that a long time ago but the stock ones i trashed for some dumb reason! figured that i could take a layer off a leafspring
|
06-25-2012, 09:41 AM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: heavy duty lift kit
You can. But you're not gonna get back to factory ride until you remove all but one.
|
06-25-2012, 11:41 AM | #5 |
Not Yet Wild
Join Date: Jun 2012
Posts: 9
|
Re: heavy duty lift kit
mine only came with 2 really thick layers of leafspring but my concern is if i take the bottom one off the little nub on the bottom to hold it on the spacer will be gone
|
06-25-2012, 12:51 PM | #6 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: heavy duty lift kit
You may have to go to the parts store and pickup some spring centering bolts.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Heavy Duty Rearend | Electric EZGO | |||
heavy duty f-n-r switch | Electric Club Car | |||
Heavy duty FnR doesn't fit!!! | Electric EZGO | |||
G8 heavy duty shocks | Gas Yamaha | |||
Ez Go Heavy Duty Front End | Golf Carts and Parts |