|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-02-2012, 08:23 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 69
|
Alltrax Install in club car
I recently replaced a bad controller in my 2000 Club Car DS cart. It was an Altrax 4844 and that is what the replacement is as well. Thought I hooked everything up the same and it works however intermittently it will not go.
Just got a new HD solenoid so I was looking inside the compartment and noticed a black wire with eyelet located under the controller and connected to the frame. I am thinking just maybe this should be connected to terminal B- Anyone else know if this is correct? Should the alltrax be grounded to the frame? Thanks in advance for any help on this. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-02-2012, 08:46 PM | #2 |
Not Yet Wild
Join Date: Jun 2012
Posts: 69
|
Re: Alltrax Install in club car
Looked at this closer and it is not grounded to the frame, it runs through the frame to the front of the cart to a wiriing harness and then who knows where, almost sure I missed it and needs to go to B-.
|
07-02-2012, 10:33 PM | #3 |
Not Yet Wild
Join Date: Jun 2012
Posts: 69
|
Re: Alltrax Install in club car
Yep that was it, one missed wire, new solenoid all good again.
|
07-03-2012, 08:44 AM | #4 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Alltrax Install in club car
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
new Alltrax controller install ? | Electric EZGO | |||
Alltrax install in G22? | Extreme DC! | |||
help with alltrax DCX install | Electric Club Car | |||
Alltrax DCX500 Install | Electric EZGO | |||
Alltrax DCX400 install | Electric EZGO |