lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-24-2012, 06:12 PM   #1
Not Yet Wild
Club Car
 
Join Date: Jul 2012
Location: Pennsylvania
Posts: 2
Default 96 48 volt wont move

Hello,
I have a 96 club car 48 volt cart that won't move. The batteries all test out well and are less than a year old. When the key is turned on solonoid clicks and power is to both posts. when I put the rocker switch in reverse it does buzz, the cart just wont move. The computer is 2 months old and i jumped the motor and it did turn (slow but I only had 1 8 volt battery to it. I do not have a wiring diagram and do not now how to test the speed controller.
Any help would be greatly appreciated. Please
mikesimz is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-25-2012, 05:58 AM   #2
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,543
Default Re: 96 48 volt wont move

Click here:

96 CC Gas and Electric
Stevegrmich is offline   Reply With Quote
Unread 07-25-2012, 08:46 AM   #3
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: 96 48 volt wont move

try jumping the main solenoid see if cart runs.....its the one without resistor coil........follow pos cable from #1 battery and it leads to your main solenoid......make sure you have batteries in and tested load tested as it only takes one to stop cart..............................
shadowman is offline   Reply With Quote
Unread 07-25-2012, 02:55 PM   #4
Not Yet Wild
Club Car
 
Join Date: Jul 2012
Location: Pennsylvania
Posts: 2
Default Re: 96 48 volt wont move

I was unable to open the link for some reason, run time error.
I jumped the solonoid (only have one) and it did nothing. All wires coming off the solonoid do have 48 volts, as a matter of fact they have 48 volts when the key is off?
Is there an easy way to test the speed controller?
mikesimz is offline   Reply With Quote
Unread 07-25-2012, 08:58 PM   #5
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: 96 48 volt wont move

Quote:
Originally Posted by mikesimz View Post
I was unable to open the link for some reason, run time error.
I jumped the solonoid (only have one) and it did nothing. All wires coming off the solonoid do have 48 volts, as a matter of fact they have 48 volts when the key is off?
Is there an easy way to test the speed controller?
if your cart has a rockerswitch for F&R you should have 2 solenoids.................................
shadowman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
wont move Electric Club Car
ez go wont move! Electric EZGO
1995 Ezgo 36 volt wont move Electric EZGO
48 volt cc wont move Electric Club Car
ezgo 36 volt wont move Electric EZGO


All times are GMT -5. The time now is 12:03 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.